Discuss Electrical assignment Help ?? in the UK Electrical Forum area at ElectriciansForums.net
I wanna done but I can’t pay 300£ for assignment ?????For me it highlights the problem within our industry, I don’t know what kind of course this lads on, but they should have taught him the formula and the process to carry out the calculations for design including correction factors. Not to mention the motor overload. Best thing to do is go back to your training provider, and ask them to explain what you don’t understand. You can’t really blag this stuff, it’s best to learn it.
I wanna done but I can’t pay 300£ for assignment ?????
This is for question 6,7.No one will or should complete this for you as it it important that you learn this.
Here is a big nudge in the right direction for you to work it out yourself.
View attachment 53416
Do you know where get information for question 1 ,On suite guide or wiring regulation,I can"t see any information online .Talk to your tutor mate, you’ve already paid someone for this I’d assume?......between your course providers and the Internet these answers are are out there and easy to find.....it’s just a lot of hardwork/practice after that but if you are determined you’ll get there
Best have a stab yourself and post what you think, members will comment on your answer and provide guidance....but wont answer the question for you.Do you know where get information for question 1 ,On suite guide or wiring regulation,I can"t see any information online .
question is State 5 sources of information which would help you design this installation .
Can you someone volunteer, check my work in question 6 ???,, PleaseBest have a stab yourself and post what you think, members will comment on your answer and provide guidance....but wont answer the question for you.
I try but still difficult, I can’t find any information on Internet???Best have a stab yourself and post what you think, members will comment on your answer and provide guidance....but wont answer the question for you.
Your calculation is correct but the answer is very badly wrong because you have put in some incorrect data through misreading the question. You have shown the efficiency as 0.75 % instead of 75% (=0.75) Therefore your answer is 100 times too large. Less importantly, 1 hp = 746W.
Think about what a motor of 0.75% efficiency would be like: It would waste almost the entire energy input. Also think about your answer of 1360A. The line and neutral cables to carry that would be as thick as your arms, yet the motor is no larger than the one in a good domestic pressure washer that runs on a 13A plug.
This is what we call a sanity check and it's worth doing every time. If the results of your calculation suggest that a cable must be 10000 km long or an electric shower will run on 0.01W, you can tell from real life experience that the answer is not sensible and probably indicates an error in the working or incorrect input data.
I try but still difficult, I can’t find any information on Internet???
[automerge]1572951987[/automerge]
What is the answer???
Did you accept this answer????Lucien has explained where your mistake is. This should allow you to rethink how you calculated it. It's no good just giving you the answer.
Did you accept this answer????
Absolutely joke , I find professional company for assignment and doing all answers wrong now waiting for refund.
They put Volt-240 usually in Uk is -230.
In formula the same .
I’m very disappointed now .
I talking about answer 7.77A why /240V , they need to used correct formula answer not 7.77A.????2.5 x 746 = 1865 Watts.
Which answer are you talking about accepting?
Edit: I may have misunderstood your post.
The quoted voltage isn't over relevant. The declared UK voltage is 230 -6%/+10%. This gives a range of 216.2 to 253.0v.Did you accept this answer????
Absolutely joke , I find professional company for assignment and doing all answers wrong now waiting for refund.
They put Volt-240 usually in Uk is -230.
In formula the same .
I’m very disappointed now .
The quoted voltage isn't over relevant. The declared UK voltage is 230 -6%/+10%. This gives a range of 216.2 to 253.0v.
They need to by used this formula???I wouldn't get hung up about the 230v issue - your calculation was wrong by a significant amount because of the percentage error.
Edit: is Lucien correct.? Did you buy these answers? You really need to try the question again yourself.
I try my self but I’m too busy all first 8 question is w
I try my self but still confused, that asking people for help ???Looks like part of your message is missing, but I can see the part which says you are too busy to try it yourself. If this is the case then there really is no point in doing the course. Would you really be happy if you passed a course like this without understanding it?
From Professional assignment electrical centre in London , the best one .Where have the answers in #19 come from.
From Professional assignment electrical centre in London , the best one .
I’m very lucky pay just deposit.
I try to claim for Fraud now
??????
Thank you .Your original question paper quotes the supply as 400v, three phase so you have 230v single phase. Ignore the 240v on your answers paper it is throwing you. Clear your mind and start again. Go back and read #15.
[automerge]1572958179[/automerge]If you've got time to claim against this company then you've got time to try the question again. Why don't you want to do this?
Do you actually want to understand things fully, or just pass the course?
I wanna understand everything and pass the courses, I try the contact the assignment company but not answer all morning.
I know, but that course for Adults because I can’t stop working at the moment, I can’t be pay my bills.I'm afraid something has to give, the course or your twelve hour working day as both are not panning out. You need to ask yourself is this course going to benefit your future prospects and if so something in your current working life has to give.
Just to clarify, what have you paid for (not the dodgy answers, the original course you are doing), and where are you doing this course? Do you have a tutor?
How much was the course out of interest? (don't answer if you don't want to).
Course is proper one Level 3 Diploma.(3500£)
One day theory, one day practice.
But assignment is individual, for everyone.
You know too hard , I asking people Electrical Clarkson Evans my Jobs they still can’t help me .
I try thank you.There is a very good technical college in Worcester, why don't you start with contacting them.
I nearly done question number 1,2 and 6 and 7 .I do hope this is a wind-up!
You had a good stab at it, but made a simple mistake. I pointed out where that mistake was, so you could correct it. But you seem to have purchased 'answers' for your assignment from someone who knows less than you do. Have a bit of faith in your own abilities, talk to your tutor, fix your own answers and you'll be 100 times better off. Good luck with your refund.
BTW, When you are in hospital for life-saving heart surgery, ask yourself whether the surgeon actually studied heart surgery, or just bought their assignment answers from cash-strapped students overseas?
I’m little be confused again but check online , I can’t find any information about supply the main workshop luminaries????I nearly done question number 1,2 and 6 and 7 .
Can you someone give me advice or show me questions number 3 and 4 , Please???
Reply to Electrical assignment Help ?? in the UK Electrical Forum area at ElectriciansForums.net