Discuss Fuse Identification in the UK Electrical Forum area at ElectriciansForums.net

S

solavie

Doing some work on a flat. Moving a light. What fuse type is in the picture. There is no marking on the fuse.

Thanks.
 

Attachments

  • IMG_1552.jpg
    184.8 KB · Views: 67
Sorry but I don't see any fuses.
 
Yea I'd go for 3871 also the markings should be on the side of them.
 
so was kon-tiki, but it crossed the atlantic.
 
Crabtree c50 3871 m3 if I'm not mistaken. One of the worst boards you will ever have the good fortune to work on.look at the live parts on that baby!
 
Yes it is a nightmare. There was not MET or bonding to gas or water. Aware it is switched on. But I switched it off when taking the l cover off and on (Guess what it is METAL) as there is a great risk of shock from the top of that box. It uses the conduit as the cpc. tested the continuity. The light was in the bathroom, so had to cross bond everything there as well. Lot of work has been done there, new kitchen and bathroom but they forgot to modernise the electric. No Rcd

Meant MCB (not fuse). This is 3871 from your replies.

Avoid Flats

Thanks
 
but the an-tiki. modelled on the same design, crossed the atlantic.
 
They have different kA ratings depending on age of the particular C50 mcb which is identified by the colouring of the writing on the mcb either white or yellow writing. I can't see what colour yours is from pic
 
They have different kA ratings depending on age of the particular C50 mcb which is identified by the colouring of the writing on the mcb either white or yellow writing. I can't see what colour yours is from pic
Im sure the colour defined what type it was not the kA rating
 
Which identifies the KA rating they are 3871 type 2 the colouring of the lettering is to identify the KA rating I have the memo from Crabtree technical if you want a copy
 
im fine i have my own technical info thanks, but ive seen white and yellow crabtree breakers side by side both stamped with 4.5kA, white was type 2, and yellow type 3. :)
 

Reply to Fuse Identification in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi, I'm adding American muscle's halo fog lights to my 2006 v6 mustang and am looking for a good place to connect the positive side to power the...
Replies
3
Views
227
Two questions: 1. I’ve had a bulb in the hall turn black with some white powdery deposits (see photo), whats caused this, guessing i should get...
Replies
10
Views
406
Hello, Is there an actual age limit on house wiring that would prevent a traditional fuse box being replaced with a consumer unit please...
Replies
8
Views
1K
Hello Shop with a 100A main fuse LED lights few amps max, cash tills, cash machine, roller shutter, auto door, nothing pulling much power but...
Replies
6
Views
558
Hi all, Been browsing these forums for a while, always great to learn a new way to skin the same cat. Anyway, cut a long story short, was an...
Replies
11
Views
629

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock