- Reaction score
- 0
Hi All
Just installed a Honeywell Accenta G4 and everything works perfectly.
I have a remote keypad upstairs on the landing. I have Program 2 set to activate all downstairs zones, which we use at night. Program 2 is set to arm itself silently.
I type in our alarm code and press P to silence the exit sound (since Program 1 is not set to silent). I select Program 2 and it sets. However...
If the landing PIR is activated during this process it then makes the exit sound until Program 2 is fully activated (exit time is 20 seconds).
If the landing PIR is not activated it is silent.
Any ideas? Is this just a flaw with the Honeywell alarm?
Thanks
Nick
Just installed a Honeywell Accenta G4 and everything works perfectly.
I have a remote keypad upstairs on the landing. I have Program 2 set to activate all downstairs zones, which we use at night. Program 2 is set to arm itself silently.
I type in our alarm code and press P to silence the exit sound (since Program 1 is not set to silent). I select Program 2 and it sets. However...
If the landing PIR is activated during this process it then makes the exit sound until Program 2 is fully activated (exit time is 20 seconds).
If the landing PIR is not activated it is silent.
Any ideas? Is this just a flaw with the Honeywell alarm?
Thanks
Nick