Insulation tape on connector blocks

[JBW175]

I had that a couple of years back, except they’d skimmed over it and left the live touching the back box so every time the poor woman washed the walls she got a belt...

Bloody Hell, that can’t have been pleasant for her, it’s madness what some people do.

 

[Dustydazzler]

definitely not OK. how could anyone know there was a cable vertical from that box, once it had bee tiled over.

I would also question their logic of tiling over it in the first place ...

Could have just stuck a double socket on it and had an extra power point

 

[JBW175]

I would also question their logic of tiling over it in the first place ...

Could have just stuck a double socket on it and had an extra power point

It was probably the same logic they used when they decided to run sockets off a 5amp lighting circuit.

That flex attached to the T&E in the picture (did) eventually end up at an outside socket. No RCD protection, old wooden framed rewireable wylex board too.

 

[ipf]

A Picasso....

 

[Baddegg]

A Picasso....

View attachment 61264

That takes a special degree of ineptitude ?

 

[pirate]

I think you meant "style"!

 

[Jako13!]

If it’s easily accessible I thought a cocky block was acceptable? I just wasn’t sure the reason we tape over the terminal block as all live conductors are terminated and the block is plastic?

 

[James]

If it’s easily accessible I thought a cocky block was acceptable? I just wasn’t sure the reason we tape over the terminal block as all live conductors are terminated and the block is plastic?

If it is accessible then yes, a chock block or “cocky block?!!” Is just fine.
Tape is not required in my opinion

 

[Jako13!]

If it is accessible then yes, a chock block or “cocky block?!!” Is just fine.
Tape is not required in my opinion

Thank you

 

[Lucien Nunes]

If a terminal block is not adequately enclosed to provide the necessary protection, a bit of PVC tape is not sufficient to complete the job. OTOH if it is adequately enclosed, the tape won't add anything. FWIW there are very few places where PVC insulating tape is actually useful for insulating. It's useful for all sorts of other things though.