Outdoor electrical socket

[westward10]

Would probably still work if no RCD in play which hopefully there is.

 

[DefyG]

Wondered if it was WiFi controlled with the blue indicators as only ever seen red indicators on BG before.

 

[nicebutdim]

Wondered if it was WiFi controlled with the blue indicators as only ever seen red indicators on BG before.

I can't quite figure out that socket/enclosure combination. As you state, BG indicated sockets have red neons over each outlet. Their wifi sockets do have blue indicators, but they're located around a flush, round switch.

 

[SJD]

Looks to be a BG WPL22 socket, which should be an ordinary IP66 socket from e.g. Screwfix (stock code 420XH), not Bluetooth or WiFi controlled.

Slightly puzzled by one photo showing what appears to be an SWA gland below the socket, yet the armour is brought into the socket housing and not earthed, while incorrect would not be the reason for it not working. Or maybe the cable enters via a nylon gland.

I'd be checking the connections at the other end of the cable, but not with a neon screwdriver!

 

[nicebutdim]

No, all seems quite normal. Blue indicators on the frame are intended to be visible when cover is closed.

WPL22-01

www.bgelectrical.uk

Edit: ninjad by @SJD

 

[davesparks]

I can't see how those LEDs are actually connected to the socket.

It looks like it is a normal socket held into the enclosure with 4 screws clamping it from the back but there no sign of wires coming from it to the LEDs.

 

[nicebutdim]

I can't see how those LEDs are actually connected to the socket.

It looks like it is a normal socket held into the enclosure with 4 screws clamping it from the back but there no sign of wires coming from it to the LEDs.

I don't fancy paying £24 to Screwfix to find out, but would guess the LEDs are on the plate and the frames simply provide a lens for them to shine through. Otherwise replacing the socket would be unnecessarily arduous and IP rating more difficult to maintain.

 

[SJD]

BG IP66 sockets are typically their standard white sockets mounted in a weatherproof frame - hence the standard screw holes with white plastic covers in the white faceplate. So the black rectangles are just lenses.

Still no nearer to guessing why the socket doesn't work. I'd ask the OP whas was connected there before, and did it actually work? Could for example, it be fed from something that appears live but can't actually deliver a sensible amount of power (e.g. was it a switch for something else)?

 

[littlespark]

With a user name like "spengler" im expecting a call to the ghostbusters to sort this out....


The cable needs its proper gland fitted.... it doesnt appear to even have a compression gland fitted, never mind an swa gland...

The cable could quite easily by pulled out.


On a nice weather day, change it to just a regular socket as a test.... if it works, its the outside socket at fault.... if it doesnt, then its where this cable is coming from. Is there a photo of the other end?
Make sure to change it back!

 

[Dustydazzler]

Or just save all the agro and get a proper sparks round for 45 minutes to test the supply cable and re-fit the socket 'properly'