problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is off

[pmh]

even disconnect every circuit from main distribution board and still getting readings checked on another site getting it there to awaiting cable company answer tn-c-s any domestic houses answers please .

 

[Marvo]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

Don't fully understand your question but try the same tests again using an analogue tester (one with a needle, not a digital display)

 

[Octopus]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

Again in English please??

 

[Darkwood]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

Don't fully understand your question but try the same tests again using an analogue tester (one with a needle, not a digital display)

Thankyou for this very useful information:dunce2:

PMSL - unfortunately a sign of the times when we feel we have to explain it...

PS welcome to the forum - not aiming that comment your way you may well know what one is just a general comment!

 

[Marvo]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

I made a post suggesting something similar last week and the guy was confused by the word 'analogue' so I'm giving more info now in case it's a term not used too much in the UK.

 

[Geordie Spark]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

I made a post suggesting something similar last week and the guy was confused by the word 'analogue' so I'm giving more info now in case it's a term not used too much in the UK.

"Analogue" ...... someone talking out of his ar$e.

 

[MDJ]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

even disconnect every circuit from main distribution board and still getting readings checked on another site getting it there to awaiting cable company answer tn-c-s any domestic houses answers please .

Bonjour, Hola, Hello

 

[BES]

The op is based in scotland maybe some strange highland dialect

 

[MDJ]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

The op is based in scotland maybe some strange highland dialect

A scotsman? ah that explains it, by 4pm they are normally paraletic, it is now after 8, I am amazed he can still see his computer lmao

 

[markc123]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

Read that 10times, and it's getting worse each time - i've now picked up the word 'site' ... did you travel to another site just to try your tester lol?

100% most confusing thread i've ever read on here.

pmh, son, you are down in electriciansforums history.

 

[markc123]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

This somes the thread up better.

 

[Marvo]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

Image removed. Please keep it civil.

 

[Geordie Spark]

Re: problems with 1mm 3 core and earth getting 80 volt on black to neg when switch is

The op is based in scotland maybe some strange highland dialect

It doesn't even translate into Geordie.