Discuss round edge conduit surface boxes in the Electrical Tools and Products area at ElectriciansForums.net

Amp David

-
Mentor
Arms
Reaction score
904
Anyone know where or who stock surface patresses for use with pvc conduit, that have rounded corners?Have some grid switches to install and the face plates have the rounded edges, so don't want to use the standard square edge boxes to mount them as imo looks dog rough.
 
Moulded PVC back boxes, mashall tufflex, Mitre, MK all have round edge boxes, electricfix stock marshalls if I remember correctly if not most wholesalers will get it in for you.
 
sure MK do them , to match their logik accessories. i --- ume you want the hi impact material ones. wouldn't fancy drilling a 20mm hole on the bog standard plastic rubbish.
 
Yeah, PVC rather than the brittle stuff a standard box is made from.

Just been looking and found the ones from uni volt and as local wholesaler sells uni volt conduit i'll get him to get some in
 

Reply to round edge conduit surface boxes in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

This is confusing, I've ordered a few bits of this stuff, some switch modules and front plates and in the bumf on the website it says:- Click...
Replies
5
Views
314
An odd question granted but bear with me. I've got to extend a radial circuit in a community centre to fit a new hand dryer in the toilets, but I...
Replies
15
Views
3K
I am only asking for YOUR opinion as to what code should be given in an EICR which sees a dry wall fixing box being used for joints behind a...
Replies
4
Views
1K
Hi all, New to the forum. I have been asked to look at this for one of our guys who's had an issue onsite after some electrical works had been...
Replies
4
Views
734
  • Sticky
Ferrets are known for being small, resourceful, and incredibly clever. They can solve many problems by fitting into tight spaces and doing jobs us...
Replies
4
Views
2K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock