Discuss single front end rcd in the Australia area at ElectriciansForums.net

B

Brilec

Hi Guys, new to forum, so may already have been talked about before, have ajob to quote for 2 bed bungalow, old wire fuses, 4 in total, 1 cooker, 1 ring main, 1 lights and 1 immersion heater, how do I fit rcd sytem to such a small system without going overboard for the customer. before hand a rcd main stitch would probably been ok but with current regs would not allow power to remain if one item tripped out the lot, have thought about rcbos but adds alot to the price, would like some suggestions
 
I try to push for dual rcd boards with en 60898 devices, If the system is old with 1mm cpc in ring and 3036 fuses may not meet disconnections times also check carefully that the lighting cct has a cpc in all parts.

Best to PIR the existing instllation also
 
Last edited by a moderator:
Hi Guys, new to forum, so may already have been talked about before, have ajob to quote for 2 bed bungalow, old wire fuses, 4 in total, 1 cooker, 1 ring main, 1 lights and 1 immersion heater, how do I fit rcd sytem to such a small system without going overboard for the customer. before hand a rcd main stitch would probably been ok but with current regs would not allow power to remain if one item tripped out the lot, have thought about rcbos but adds alot to the price, would like some suggestions

ask your wholesaler about europa i`ve done a few c/u changes using these and never had any problems. useually find europa rcbo`s are about £12 each. anyone know anybetter then let me know.


i`m always interested in a bargain
 

Reply to single front end rcd in the Australia area at ElectriciansForums.net

Similar Threads

Hi I've inherited a very tight space, a KMF switch and some split-con for a sub-main to try and tidy up. It's a joyous non-restrained single...
Replies
3
Views
193
Trying to organise a CU replacement at home. It's a 1930s property. It's got a 10way CU but with no RCD protection. Was after a larger unit with...
Replies
65
Views
4K
Hello, I am hoping this is in the correct forum. To start, I acquired a film processing machine that runs on 3 phase. Now before getting the...
Replies
19
Views
3K
Hi all, Grateful for your expertise regarding my confusion on the below. Context: French rural domestic property Single phase supply, TT...
Replies
12
Views
2K
I decided to get solar panels, the inverter instructions say one can use type AC, so the existing 14 x RCBO CU seems OK, may be a good idea to fit...
Replies
4
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock