T
The Ghost
oh yeh missed the decimal. I knew that.
Discuss Smallest possible cable for a 4w LED load. in the Lighting Forum area at ElectriciansForums.net
Share this page
OP
- Reaction score
- 127
Cheers guys, I have just kept the original wiring other than the main flex. I've replaced dodgy connectors with slightly less dodgy crimps. I devised a cable clamp on the incoming flex also. It's as safe as i can sensibly make it
I found an Inline dimmer with a min load of 11W so it should work to about half light. Really impressed with the 4W filament LED lamps, they don't even get hot to the touch but they are very bright and i think the dimmer will be appreciated...
I found an Inline dimmer with a min load of 11W so it should work to about half light. Really impressed with the 4W filament LED lamps, they don't even get hot to the touch but they are very bright and i think the dimmer will be appreciated...
- Reaction score
- 25,472
How have you enclosed the crimps.
OP
- Reaction score
- 127
In a way that I deem appropriate for the application...
- Reaction score
- 25,472
Please tell.
- Reaction score
- 2,602
Stirrer! Ha ha!
OP
- Reaction score
- 127
I'd rather not thanks, you will just tell me that it's inadequate.
I'm sure you will have nothing positive to say, i can do without that frankly...
I'm sure you will have nothing positive to say, i can do without that frankly...
B
Barry White
Probably a lot safer now than when it was first made. Candles were a major source of house fires. There you go a positive reply!
Can't be worse than the original tape and chock blocks?
I believe you would have got an honest review of the work you have done. good or bad would depend on the way it was done.
Can't be worse than the original tape and chock blocks?
- Reaction score
- 25,472
Maybe we will see it.
Reply to Smallest possible cable for a 4w LED load. in the Lighting Forum area at ElectriciansForums.net
Share this page
Similar Threads
- Locked
- Sticky
Beware a little long.
I served an electrical apprenticeship a long time ago, then went back to full time education immediately moving away from...
HI,
I am hoping someone on here can help. I am looking for a fused inline mains connector plug... capable of taking a 5 amp fuse / 240 volt feed...
Hi All.
In our En-suite we have 3 MR16 downlighters, a bathroom cabinet( that incorporates two small halogen spot lights and a shaver socket, all...
Hi,
I'm doing a complete house refurb including re-wiring. We would like dimmable LEDs downlighters throughout the house.
We've thought of...
Prefix - I've tried to post this in automotive, but it would not let me. This may be because I have not been recently active. Apologies if this is...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.