Discuss Testing garage CU for assesment!!! in the UK Electrical Forum area at ElectriciansForums.net

Blimey. Had to go to work guys sorry if not replied. Basically I've run a 6mm SWA from main DB to a 2 way garage DB. Didnt opt to use PME from house, instead earth staked the outside building. Obviously a big no no from the sparks on here. All I asked was advice about testing. Thanks
 
Last edited:
Ahhhhh I was an apprentice at a site in Burnt Oak when on the 15th of February one of the sparks turned up.

He was asked how his Valentines date went with his missus and said not well as he had bought her some stockings and suspenders, she told him to F off and called him a perv and to wear them himself, which he did to work under his jeans and showed us all......... I was 18 he reminded me of Kenny Everett.......

They must of chaffed somewhat :)
 
Hum .... so if the cabin trips the RCD it WILL affect the house.

Sounds like you have 2 x 30 mA RCD's in series.

Not necessarily not connected earth in main DB only in log cabin end. I agree now I should of created a main side in house DB and used PME for earthing, would of been a better solution.
 
Not necessarily not connected earth in main DB only in log cabin end. I agree now I should of created a main side in house DB and used PME for earthing, would of been a better solution.

On the basis you MUST have an RCD in the cabin ...

You clearly don't understand RCD's .......... they detect the imbalance of the line and neutral ......... the earthing is irrelevant.

You need to make "improvements" before your assessment IMHO
 
Hence creating a main side in main DB

On the basis you MUST have an RCD in the cabin ...

You clearly don't understand RCD's .......... they detect the imbalance of the line and neutral ......... the earthing is irrelevant.

You need to make "improvements" before your assessment IMHO
 

Reply to Testing garage CU for assesment!!! in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi Guys, hopefully someone will know the answer. Testing an install on a (domestic) PME system I have a garage consumer unit supplied from one of...
Replies
17
Views
2K
I've just picked one of these up on a famous auction site. The voltages, low and high resistance ranges all appear to be working fine but it's not...
Replies
7
Views
296
Hi all, Been a while since I have been on here. I have been on an apprenticeship the last 3 years training in the BMS world. Taking that into...
Replies
7
Views
374
Hi fellow sparks, I've just started out on my own so I'm spending a lot of my time trying to find out the correct way of doing things of...
Replies
13
Views
923
Hi All New to this forum, have read the posts on here from google but only recently signed up. I'm having some issues and some input would be...
Replies
13
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock