G
GreggElectrical
Hi.
I was called to a local hotel to find a fault. Fault was traced to commercial dishwasher in kitchen and more specifically the element.
Against my better judgement I decided to order one up and repair it for them (what could go wrong?) Whist changing the element the manager began to tell me how sometimes the machine spills water everywhere. After the element was fitted I began looking into the over flow situation. The fill level is controlled by a pressure switch below:
I adjusted the dials assuming this adjusted the fill level but no luck. I then found the pipes were all blocked with lime scale (the whole thing was bunged up everywhere). A good clean out and we are back in business. However I have now adjusted the pressure switch and I'm not sure how to set it back up again.
Can anyone tell me what each of the dials do? The switch is the one shown in the picture. There is a third dial at the top left barely visible in the picture.
Any help would be much appreciated.
Thanks
Austin Gregg.
I was called to a local hotel to find a fault. Fault was traced to commercial dishwasher in kitchen and more specifically the element.
Against my better judgement I decided to order one up and repair it for them (what could go wrong?) Whist changing the element the manager began to tell me how sometimes the machine spills water everywhere. After the element was fitted I began looking into the over flow situation. The fill level is controlled by a pressure switch below:
I adjusted the dials assuming this adjusted the fill level but no luck. I then found the pipes were all blocked with lime scale (the whole thing was bunged up everywhere). A good clean out and we are back in business. However I have now adjusted the pressure switch and I'm not sure how to set it back up again.
Can anyone tell me what each of the dials do? The switch is the one shown in the picture. There is a third dial at the top left barely visible in the picture.
Any help would be much appreciated.
Thanks
Austin Gregg.