Wiring a table lamp direct to a mains light switch?

[Hands on]

Hi all, was wondering if is possible to wire a 3 amp table lamb directly to a mains light switch?
The light switch is used for an outside light has two brown wires going to the switch and two blue wires in a chocy block going nowhere?
Thanks.
Steve.

 

[westward10]

How are you intending to connect it to the circuit.

 

[Hands on]

How are you intending to connect it to the circuit.

My thoughts were to connect the brown wire from the lamp directly to the plug and wire the blue wire to chocy block?

 

[westward10]

You intend to connect the table lamp flex direct to the light switch?

 

[Hands on]

You intend to connect the table lamp flex direct to the light switch?

Only if it is possible and safe?

 

[westward10]

How will you get the flex into the light switch?

 

[Hands on]

How will you get the flex into the light switch?

The cable is coming down the wall in conduit not chased in the wall so was going to thread it through the top?

 

[westward10]

Need to see a pic of what you intend to do.

 

[Hands on]

Pics sent hope it makes sense?
[automerge]1582463118[/automerge]
Pics sent hope it makes sense?

 

[westward10]

The best way to do this would be to bring another trunking from the bottom and fit a 2A socket. The socket would require a three core cable as well as additional 30ma rcd protection.