Wiring Finder Step Relay and Dimmer with Multiple Switches

[kuzmabruk]

I am wiring a lighting system using a FINDER 15.81 DIMMER and multiple 9-15W LCD lights and switches at multiple points on a 220v electrical system.

Here is the wiring diagram that comes with the FINDER 15.81 DIMMER



This is how I have wired 2 switches and 2 lights to the FINDER 15.81 DIMMER (note: the brown and blue wires on the left side of the FINDER 15.81 DIMMER are expected to go to the breaker box/fuse panel. I am confused on how to get the ground from the breaker box/fuse panel as I am using a 3-wire.









If someone could let me know whether I have wired this system properly and whether I only need to connect the brown (hot) and blue to my breaker to test my system, it would be much appreciated.

Any other suggestions would be appreciated also.

Sincerely,
Kuzma