confusion

Recent contents Top users
  1. D

    UK MCB type confusion.

    I've noticed at my grandparents house that all the MCB's in the consumer unit are all type C, every single one of them. Including the ring final circuits and lighting (there's no fluorescent lights in the house at all). The house isn't that old as well. Maybe about 16 years old. With me being a...
  2. N

    2 way wiring old UK wiring confusion

    Hi I need some help. I have a 2 x 1 gang 2 way light switches - 1 on the upstairs landing and 1 downstairs. They both used to work to control 1 light but have recently stopped. I have opened them up and messed around and now cluelesss how to put them back! The upstairs switch (2nd Picture)...
  3. M

    Bit of confusion regarding downlights

    Hi all, I am a practicing electrical maintenance engineer but my background is electrical installation/inspection and testing however im a little out of touch (I do have 18th however!) don’t use it, you lose it and all that. so my friend has recently had a EICR done ready for the imminent...
  4. T

    AM2 lighting circuit - confusion

    I know this has probably been asked a dozen times on this forum but I just want to make sure that I'm doing this the correct way before going into my exam. I got told that in the am2 I need to have neutrals at every switch in connecters. I have never done it this at work hence the confusion...
  5. G

    EICR Question - Lots of confusion out there ....

    I need to have an EICR since I am getting a small HMO going, and this is the current fuseboard, seems REG16 one.. I had a few electricians coming around and some say they have to change the board, some says I need to RCD all the circuits, some says they only provide a paper report and some say...
  6. S

    Economy 7 - need confusion clearing up please!

    We have an Economy 7 meter and tariff. There are 2 separate fuse boards and one meter with the dual rate on. Am i right in thinking that ANY electricity we use at night will be cheaper as the meter has a 'timer' to switch to the cheaper tariff? If so then why is there the need for a separate...
  7. S

    Electrical shower confusion

    Hey guys, I'm currently doing my level 3 install qualification and I've been asked by someone to replace an electrical shower unit for them, now from my knowledge I am allowed to do said work as long as the power rating of the shower is the same as the old one and that it doesn't need a new rcd...
  8. W

    Cat 5 confusion as to which way

    Something soo simple... cat 5 I’m heading into my am2 exam next week having never terminated the cable. I’ve searched online and I see different configurations everywhere I’m confused as the numbers don’t line up with the colours the bottom diagram to the table also I’ve seen pictures of the...
  9. gazdkw82

    Part P ...................

    I'm almost embarrassed the bring this up again but the whole thing still coming fuses me. I head again today, a experienced spark say "iv got part P" when talking about qualifications. I understand what part P is and I have past my building regulations exam as part of my level 2 however, how...
  10. R

    Qualifications confusion.......

    Am currently extending house and will be installing a smart home system throughout. My builder's sparks will be doing whatever is required to comply with regs etc. I'm also intending to operate the smart home installation stuff as a bit of a future career change/semi retirement business...
  11. Doomed

    Confusion two rate electric meter?

    Got an e-mail from an estate agent we look after rented properties for: "Hi, As discussed, the tenant of this property has advised that in order for them to have a smart meter installed the meter in the property needs to be changed to a two rate meter. However, an electrician will need to...
  12. P

    Coin Meter confusion

    Hi all.. needing help with an old Smith coin Meter. I've moved into a flat that has a £1 coin operated meter that the tenants upstairs use for their immersion heater. This is how it works.. they put in a £1and that in turn runs off my electricity. I have told my landlady who says everything is...
  13. D

    Zs / Ze 1720 confusion

    Can anyone advise or explain the correct procedure to carry out the above tests on a megger 1720? I recently purchased a megger 1720 and thought I would have a play with it at home before taking it on site. When carrying out z tests it give you a choice of 2 and 3 lead hi and low test all...
  14. P

    Confusion with new lights fitting

    Hello, I have fitted a double insulated light fitting in my bedroom with no problems. I had lying around a voltage tester, now I understand these are very unreliable, but when I touch the fitting with it, it will light up. There's a few other appliances that it'll do the same. I'd just...
  15. N

    Confusion about 2394

    Hi all I have the 2394 practical exam coming up and wanted a little advice on an issue. Where the installation is split into two parts a three phase board, which supplies a single phase board. When completing the testing sequence should seperate them into db1 and it's test results and db2 and...
  16. C

    Am2 lighting confusion

    hi there I'm new to this today but I was wondering if anyone could help, I have my am2 on Monday and I can wire an ordinary 2 way intermediate circuit no problem but on my precourse the said that I need to take a neutral to every switch using t+e and was just confused to how I would do that...
  17. Marvo

    Gender Neutral Confusion..............

    Okay, this may not be the right forum to ask this question but I figured you guys in the UK are on the cutting edge of political correctness so I'll give it a go. I had a job applicant send me a resume/CV and on it he states he's 'gender neutral'. I'll be the first to admit I'm not up to speed...
  18. S

    RCD Testing Confusion - Help!

    Hi Ive got a question regarding RCD tests. If a DB had 7-8 ccts on MCBs all covered by a Main RCD, should we do only one cover-all test on the main RCD, or record an individual RCD test for each circuit? Other sparkys on my firm have been doing an RCD test for each circuit, effectively...
  19. T

    Twin florescent led tubes confusion

    Good afternoon all, I have a set up of two tubes wired together so that both tubes need to be working to make it all work. They run off the old fashioned fluorescent tubes. Electro magnetic ballasts. I've bought Fusion T8 led tubes, 45mA 9w 300 900lm 4000k 04/16. These work fine. When...
    • Tile seller
    • Thread
    • confusion led tubes
    • Replies: 26
    • Forum: Lighting Forum
  20. A

    Earth arrangements confusion

    Working on a old property in a slightly remote area installing a new circuit. When I looked at the earthing it looked like a tns but I investigated and found a old 2.5mm running towards the rod. My problem is I am getting a ze reading of 0.25 ohms. Ino we had a really heavy down poor the...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Tilers Talk
UK Tiling Forum
Tilers Forum
Tiling Forum UK
Electricians' Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock