Discuss 2394 Resut in the UK Electrical Forum area at ElectriciansForums.net
Result came through this morning from the December exam. Passed. Get in :hurray:
Well done.
So how many of you that have just completed C&G 2394 are going on to complete the 2395?? As i understand it, you need both parts to gain the equivalent of the older C&G 2391 verification/testing. From what i can make out, the 2394 is the easy section.
well...for a start if you are working to BS7671 then terminology shouldn`t be an issue really...should itIm going to stick with the 94 at the moment, then when I've topped up the bank balance (when the wife allows) I'll look at the 95 then. I don't really have the scope of work at the moment where the 95 would be beneficial to me. Im just happy to have got through the 94 first time. I found the practical and online exam to be easy really, it was just the dreaded written i wasn't looking forward too. Its all about using the correct terminology and reading the GN3 over and over again, throwing in the regs a little too.
I honestly can't see the point of C&G 2394, i can't see the point of splitting/changing the original inspection and testing qualification (C&G 2391) in the first place. The only people it serves is the C&G institute and training centres who now charge double that of the original cost of the 2391!!
Reply to 2394 Resut in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.