H
HUD
dose anyone know bsen code for sp & n 60 amp wylex switch fuse ?
Discuss bsen code for switch fuse in the Australia area at ElectriciansForums.net
Share this page
OP
acat
BS EN 60947-3 1999 is for switches, disconnectors, switch-disconnectors and fuse-combination units.
Page 236 of BRB
Chris
Page 236 of BRB
Chris
OP
Guest123
Chris is right, the switch is to BS EN 60947-3, but where it asks for the overcurrent protection for the circuit you'll need the BS number for the fuse in the switchfuse...BS1361, or BS 88.
Reply to bsen code for switch fuse in the Australia area at ElectriciansForums.net
Share this page
Similar Threads
How would others code the switch fuse not meeting IP4X on the top surface?
The live terminals are very close to the top edge
Wiring cooker hood into a switched fuse spur with a 13amp fuse in the spur. The cooker hood is 3amp. Should I swap out the 13amp fuse in the spur...
Just wanted to get some thoughts from other electricians who regularly do EICRS, does anyone else code a fan isolater with no 3A fuse protection?
Hi guys
Completed an EICR yesterday. One of the Sockets Radials had no CPC so R1+R2 plus Zs could not be not be completed. Does anyone know the...
DIY'er question:
I have a singe switched fused spur above my kitchen counter, providing power to an undercounter fridge socket beneath it. The...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.