Cns anyone please help with this French Nano LED table lamp?

[Jeffersonelias]

I would like to install a plug as the original one has been cut off. It has a black sleeved wire but also a non sleeved cable with no indication whether it is a live.

Can you please advise which type of plug I need for this?

Many thanks

 

[westward10]

Do you have the 24v power supply for it because it isn't mains voltage.

 

[Jeffersonelias]

This is the other end of the cable with no plug.

 

[Jeffersonelias]

Do you have the 24v power supply for it because it isn't mains voltage.

No, I don't. I wasn't sure what to get. Are you able to post a link for the type of power supply I need?

Please see the photo attached. One end is connected to the switch but the other end, which supposedly had the power supply has been cut off.

Thank you

 

[westward10]

Do you not have the 24v power supply that part is probably a controller/dimmer.

 

[Jeffersonelias]

Do you not have the 24v power supply that part is probably a controller/dimmer.

Please see the attached photo, this has the +/- sign on it, I believe it to be the dimmer and the other end that's been cut off is the plug that goes into the socket.

 

[westward10]

You are missing the 24v power supply to which that cut off cable connected to. Fit a 13A plug direct to that it will all go up in smoke.

 

[Jeffersonelias]

You are missing the 24v power supply to which that cut off cable connected to. Fit a 13A plug direct to that it will all go up in smoke.

Thank you Westward. Do you reckon I should just get any 24v power supply or isnit best to just bin it?

 

[westward10]

Depends on it's value and whether it actually works in the first place.

 

[Jeffersonelias]

Depends on it's value and whether it actually works in the first place.

Yeah, it's a 500 euros lamp and I wouldn't mind having a go at fixing it even though I'd have to buy a power plug for a fraction of the price.