Confused by the shear volume and what to do

[Boiler Repairs]

Good morning all,

I mainly work on boiler faults, and repairs. I sometimes have to install wireless thermostats, or renew the fcu switch. I’ve seen a video by an electrician about using a ratchet crimp tool, and a plumber with the same. I’m after some advice as I’m thinking to use bootlace ferrules on the stranded terminals, however, there’s that many to choose from I’m just confused as to what to purchase.

Info received so far: carry on using stranded terminals, purchase an expensive crimp tool with links to expensive tools, search amazon and eBay for approx £12 ones.

I’m one for investing in decent quality, it it’s not my main job, so don’t want to pay extreme amounts either. I’ve seen the ones from TLC, which I may end up purchasing, however would I use all the terminals in the kit?

Anyone got any thoughts on the following?

Cord End Bootlace Ferrule Terminal Crimper 0.5mm² to 10mm² | eBay

Find many great new & used options and get the best deals for Cord End Bootlace Ferrule Terminal Crimper 0.5mm² to 10mm² at the best online prices at eBay! Free delivery for many products!

www.ebay.co.uk

View: https://www.amazon.co.uk/SWA-RPU-Crimping-Uninsulated-Terminals/dp/B07D5KPT1X

https://uk.farnell.com/knipex/97-72-180/crimp-plier-for-cable-links/dp/9168516

 

[Strima]

TBH a bootlace crimper doesn't need to be top of the line tooling, as long as it forms the ferrule and traps the conductors most things will work. Most screw connections destroy the ferrule anyway.

I have similar to this and it works very well:

UK Bootlace Ferrule Hand Wire Cord End Crimper Crimping Tool Pliers 0.25-10mm² | eBay

Find many great new & used options and get the best deals for UK Bootlace Ferrule Hand Wire Cord End Crimper Crimping Tool Pliers 0.25-10mm² at the best online prices at eBay! Free delivery for many products!

www.ebay.co.uk

 

[derek]

The CK ones seem pretty good, I have a pressmaster one myself as I do a lot of panel work and instrumentation.
The one from tlc will probably do

Ratchet Tool for 0.5mm²-10mm² Ferrules

www.tlc-direct.co.uk

 

[SparkyChick]

I just picked up a kit from TLC Direct, crimp tool and a bunch of ferrules. Does the job

 

[derek]

One advantage of the type Strima mentioned is that there is no risk of accidentally using the wrong section of the crimp die, which could be an issue if you then use a lever type terminal.

 

[Boiler Repairs]

Without sounding pessimistic, the one @Strima mentioned, I’m concerned it wouldn’t stay on?

 

[Strima]

Without sounding pessimistic, the one @Strima mentioned, I’m concerned it wouldn’t stay on?

Once you have crimped the ferrule it will stay on, I use a similar one and have never had any issues with ferrules falling off.

Ferrules are designed to hold the fine copper strands together so they all enter the termination correctly and as such do not require the same mechanical strength as a through crimp for example.

 

[telectrix]

i have one similar to the one strima mentioned.. purrrfick. got it from ebay with 500 assorted bootlace crimps for £20. never use my £50 Klein except for meter seals ( OOOPS I didn't say that, slip of the fingers).

 

[Boiler Repairs]

Once you have crimped the ferrule it will stay on, I use a similar one and have never had any issues with ferrules falling off.

Ferrules are designed to hold the fine copper strands together so they all enter the termination correctly and as such do not require the same mechanical strength as a through crimp for example.

Sorry to ask, do these do the uninsulated types as well?

 

[telectrix]

Sorry to ask, do these do the uninsulated types as well?

only if they are bootlace. the jaws crimp automatically according to the cable conductor size , unlike the red/blue/yellow crimpers which crimp the insulated part of the crimp.