confused with procedure need help

[Octopus]

cheers murdoch all earthing is within the regs and my instal is withing the regs so its just a confusion on what to test to make sure my eic is correctly filled out

With your qualifications how come you don't know about the certificates.

You need to deal with the part.p

 

[Midwest]

The Certsure on-line certification, uses the phrase 'NOT WOKED ON' for those circuits, not worked on! Succinct and to the point.

 

[danny harding]

b

With your qualifications how come you don't know about the certificates.

You need to deal with the part.p

because im newly passed and cant remember everything down to a t on the testing side so im just double checking

 

[Midwest]

b

because im newly passed and cant remember everything down to a t on the testing side so im just double checking

The notification of your new circuits is an issue that needs consideration. Have you done this job for financial gain?

 

[Pete999]

installed a secondary 2 way consumer unit to run a boiler and immersion heater i know i have to issue an eic but what do i actually test? r1 + r2 of the radial to the secondary consumer unit and both radials from the secondary consumer? please can someone give me a rundown of what id need to test?

It's R1+R2, r1,r2and rn are end to end resistances.

 

[MJPD29]

If like to hope if you are installing a consumer unit you are an electrician and are competent enough with testing to carry out the work following correct procedures with part p