Confusion After Installing New Bathroom Extractor

[Chris Blunt]

Hi Guys

I am in need of some help. i have just installed a new bathroom extractor. Since the installation, the following happens:

• isolator in off position turns the light on and off as usual - extractor fan not working as expected
• isolator turned on, causes the bathroom light to turn on and stay on - and can not be turned off from the light switch. extractor fan can be used as expected

My old extractor had 3 terminals and the new one only has a live and neutral, how can i sort it out?

Many thanks, hope the issue was written clearly

 

[Leesparkykent]

Have you wired the permanent live to the fan instead of switched live?

 

[Chris Blunt]

i think i may have. would this be the grey cable with a brown sheaving added to it? if so what do i do with the live wire not in use?

 

[Geordie Spark]

Hi Guys

I am in need of some help. i have just installed a new bathroom extractor. Since the installation, the following happens:

• isolator in off position turns the light on and off as usual - extractor fan not working as expected
• isolator turned on, causes the bathroom light to turn on and stay on - and can not be turned off from the light switch. extractor fan can be used as expected

My old extractor had 3 terminals and the new one only has a live and neutral, how can i sort it out?

Many thanks, hope the issue was written clearly

Hi Chris.

You've written the issue very clearly and from that it is blatantly obvious that you're not an electrician and haven't a clue what you're playing with!

With that in mind you "sort it out" by employing a qualified electrician to do it for you before you hurt yourself and/or somebody else.

Sorry for being blunt, but it is the best option.

 

[joehat]

i think i may have. would this be the grey cable with a brown sheaving added to it? if so what do i do with the live wire not in use?

Isolate it in a terminal block, which even me being a new ish to domestics knows that!!

 

[Chris Blunt]

Hi Chris.

You've written the issue very clearly and from that it is blatantly obvious that you're not an electrician and haven't a clue what you're playing with!

With that in mind you "sort it out" by employing a qualified electrician to do it for you before you hurt yourself and/or somebody else.

Sorry for being blunt, but it is the best option.

Thanks for the useful help, it turns out i have now resolved my issue. Thanks to the helpful gentleman who responded.

I was going to write a witty to reply to your comments, then i saw your Britain First signature, and thought, you just wont get it. Ta!

 

[Andy78]

Thanks for the useful help, it turns out i have now resolved my issue. Thanks to the helpful gentleman who responded.

I was going to write a witty to reply to your comments, then i saw your Britain First signature, and thought, you just wont get it. Ta!

Sorry you feel like that, but many here feel that to encourage DIYers on a public forum is wrong from a point of view of responsibility and liability. You more than likely do not have the correct equipment or knowledge to safeguard yourself, and to encourage the incompetent in endeavours that may be life threatening is the practice of fools.

 

[tazz]

Due to the OP missing all points on installation & testing, and obvious no concern for anybodies safety
This post is closed