OP
lja
hope im not too late for this thread worked for dno and suppliers way to treat this is like this contact supplier inform them you had your electrician round to check your house ect and he informed you your meter has been wired incorrectly he is not allowed to touch it and needs attention asap your worried about saftey they must act and theyl log saftey issue. do not contact dno if possible they prob just cut you off and say ring supplier as well as informing them themselves regarding meter reader taking time the problem with that is he may be a meter fitter on reading duty hence he should spot it a mile off if he has informed supplier they can push a revenue protection case warrent ect you dont want to get that far by looks of pic seals are present on henley but not meter curious they should send someone round by appointment and they should also book with dno to get that service changed more than due one 6 to 8 week turn around you must make the call my friend.
the second way is to get an electrician whose comfortable to do so to cut seals and rectify then ring supplier and ask for a reseal due to emergency board change (grey area) theyl send someone out to put new ones on after huffing and puffing a while but again it saftey issue they must comply however if the meter reader has informed supplier you could make yourself look very guilty.
the second way is to get an electrician whose comfortable to do so to cut seals and rectify then ring supplier and ask for a reseal due to emergency board change (grey area) theyl send someone out to put new ones on after huffing and puffing a while but again it saftey issue they must comply however if the meter reader has informed supplier you could make yourself look very guilty.