Hi, These electric heaters have been installed and are generally operated via the HeatApp on a mobile phone. However the pairing has been lost and I am having difficulty re pairing. The installer mentioned that I need to add a module to each zone and to pair, press the temperature button down to zero degrees and then attempt to pair. Do that on each radiator. I've attempted several times but cannot add/allocate a heater to a zone. Any advice please?
Discuss Elkatherm heater pairing issue in the DIY Electrical Advice area at ElectriciansForums.net
Reply to Elkatherm heater pairing issue in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
Hi Guys,
Had a call out today about an odd issue with a newish Creda DT storage heater.
Basically..
Storage heaters were installed in one flat...
m having a bit of an issue that is proving difficult to resolve.
For 2 years I have been having no problems with my setup. I have a 3 zone house...
Ok guys, first post so be gentle. I have a standard setup of two two way switches, one at the bottom of the stairs and one at the top so the light...
- Sticky
Ferrets are known for being small, resourceful, and incredibly clever. They can solve many problems by fitting into tight spaces and doing jobs us...
Hi,
My alarm system is a Texecom control unit (Premier 64-w) + Keypad + Sounder, and is using the wired zones 1-4 only, with no additional...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Will the mini (or larger) RCBO fir in the this starbreaker board?- Latest: HappyHippyDad
-
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.