Just started PAT testing and trying to understand why stuff fails. Recently had a large fridge fail. The cable was scuffed with a slice of the flex missing so the yellow wire was visible but not the copper. The readings on the tester were 0.6 plus in various places. Could it just mean the cpc is damaged so a mew cable is all that’s needed or could there be something else going on. Out of interest I did other tests which it passed.
Obviously I did fail it and removed the fuse and told the Damsel to call an Engineer but wanting to learn the whys...
Obviously I did fail it and removed the fuse and told the Damsel to call an Engineer but wanting to learn the whys...