GS38 Compliant voltage indicator recomendations.

[r.ali]

Hi all,

Level 3 student here looking to purchase a GS38 complaint voltage indicator and could do with your recommendations please.

I need a voltage indicator for safe isolation that is GS38 compliant so it can be used for safe isolation procedure and used on NICEIC competent person assessment etc.

Looking for something compliant, reliable and durable with continuity testing too that wont break the bank.

I've had a look at some Flukes but my understanding is that these are not GS38 compliant straight outa the box unless probe tips are purchased for them, also am I correct in thinking that the Flukes will also trip the RCD unless a specific testing procedure is followed? For these reasons I have counted out the Fluke but please correct me if I am wrong.

I'm looking at purchasing the Martindale VT28, which on paper so far looks to fit the bill and at £54 suits my budget. For the money seems like decent feature set. The features are as follows:

• 4 digit LCD display
• Voltage Range: 12 - 690V AC / DC
• LED Indication: +/- 12, 24, 50, 120, 230, 400, 690V
• Single Pole Phase Test: 90 - 6390V
• Phase Rotation Test: 100 - 690V
• Continuity Range: 0 - 500kΩ
• GS38 Caps: Removable
• Standards & Regulations: BS EN61243-3 2010
• Overvoltage Category: CAT IV 600V, CAT III 690V
• Cable Length: 1.2m
• IP Protection: 64
• Auto Power Off
• Torch Light: White LED
• Power Supply: 1.5V AAA x 2
• Dimensions: 258 x 73 x 23mm
• Weight: 180g (with batteries)

Can anyone vouch for this tester, any reviews, advantages / disadvantages or anything else to watch out for?

All suggestions and general advice as-well as other recommendations would be greatly appreciated.

Thanks in advance all.

 

[Wilko]

Hi RA - it's good to get one you're confident with. I've been using KT1790 the last few years and I'm still here. It's got a dinky light and a voltmeter built in (looky there - it's 247V, good thing I didn't touch it, ha ha). Paid an extra £20 for that
Kewtech KT1790 Voltage Detector - https://www.test-meter.co.uk/kewtech-kt1790-voltage-tester/

 

[Grant webber]

Megger TPT 320 had mine for years now been through the wars and never missed a beat

 

[Pete999]

Hi all,

Level 3 student here looking to purchase a GS38 complaint voltage indicator and could do with your recommendations please.

I need a voltage indicator for safe isolation that is GS38 compliant so it can be used for safe isolation procedure and used on NICEIC competent person assessment etc.

Looking for something compliant, reliable and durable with continuity testing too that wont break the bank.

I've had a look at some Flukes but my understanding is that these are not GS38 compliant straight outa the box unless probe tips are purchased for them, also am I correct in thinking that the Flukes will also trip the RCD unless a specific testing procedure is followed? For these reasons I have counted out the Fluke but please correct me if I am wrong.

I'm looking at purchasing the Martindale VT28, which on paper so far looks to fit the bill and at £54 suits my budget. For the money seems like decent feature set. The features are as follows:

• 4 digit LCD display
• Voltage Range: 12 - 690V AC / DC
• LED Indication: +/- 12, 24, 50, 120, 230, 400, 690V
• Single Pole Phase Test: 90 - 6390V
• Phase Rotation Test: 100 - 690V
• Continuity Range: 0 - 500kΩ
• GS38 Caps: Removable
• Standards & Regulations: BS EN61243-3 2010
• Overvoltage Category: CAT IV 600V, CAT III 690V
• Cable Length: 1.2m
• IP Protection: 64
• Auto Power Off
• Torch Light: White LED
• Power Supply: 1.5V AAA x 2
• Dimensions: 258 x 73 x 23mm
• Weight: 180g (with batteries)

Can anyone vouch for this tester, any reviews, advantages / disadvantages or anything else to watch out for?

All suggestions and general advice as-well as other recommendations would be greatly appreciated.

Thanks in advance all.

https://www.amazon.co.uk/DRUMMOND-M...537791802&sr=8-3&keywords=drummond+test+lamps
Plus a proving unit of course

 

[Midwest]

I bought a Fluke T110, thats GS38 compliant tester, the tips are in the module that stops you stabbing yourself (must fit them one of these days). Its about £50 now days.

I also bought a Fluke case to keep nice & safe in.

I did have a Di-Log before that, but it only lasted a few years, before the leads became detached from the body. Whatever one you get, make sure that bit is quite robust, as it seems one of the achilles heal for all these testers.

 

[SparkyChick]

I've had a look at some Flukes but my understanding is that these are not GS38 compliant straight outa the box unless probe tips are purchased for them, also am I correct in thinking that the Flukes will also trip the RCD unless a specific testing procedure is followed? For these reasons I have counted out the Fluke but please correct me if I am wrong.

You are wrong

I have a Fluke T150... it is GS38 compliant as it comes with probe shrouds that can be removed (like the Martindale). It can trip RCDs, when I want it to... by probing between line and earth and pressing a button on each probe that drops it's impedance such that around 30mA will flow through it.

It's not exactly been mistreated, but it's been dropped several times, walked on and used quite alot and it's all good. Over 2 years old.

Would I buy another one? Absolutely.

 

[haptism]

I bought a Fluke T110, thats GS38 compliant tester, the tips are in the module that stops you stabbing yourself (must fit them one of these days). Its about £50 now days.

I also bought a Fluke case to keep nice & safe in.

I did have a Di-Log before that, but it only lasted a few years, before the leads became detached from the body. Whatever one you get, make sure that bit is quite robust, as it seems one of the achilles heal for all these testers.

Midwest, does the T110 trip rcd's, I know some of them do. Im after a tester also

 

[oracle]

Voltage indicators have one job, indicating voltage The standard for 2 pole voltage indicators is BS EN 61243-3:2010 and came in force May 2013.

In June 2015 a revised edition of Guidance note GS38 was published which requires voltage indicators to be built to this standard. Edition 4 of GS38 also includes advice on how to use proper selection and maintenance of test equipment.

Whatever you buy, make sure it meets this standard

 

[Midwest]

Midwest, does the T110 trip rcd's, I know some of them do. Im after a tester also

I've used it for over two years now, its never tripped an RCD yet. I believe there is a function to test RCD's, perhaps there's some confusion there. Have a read of the manual;
http://www.free-instruction-manuals.com/pdf/pa_1424110.pdf

 

[Andy78]

I have a T110. The RCD trip function has never worked. Now neither does the continuity or self test functions. There are recognised problems with the T series from Fluke. Steer clear.