- Reaction score
- 143
Hey all, I am needing to look into converting a lot of halogen dichroics 12V to LED's some also to be dimmable.
Now for your experience bit, can they be fitted with an LED driver x 1 per lamp as the MR16's had and an appropriate trailing edge dimmer module or as most lower wattage drivers seem to be non dimmable would that mean you can't do 1 driver per head and need to try and rewire through existing holes to group a few lamps to 1 higher rated dimmable driver ?
Option 2 I'm thinking of is just change fly leads all to GU10's and revert them to dimmable mains powered LED's to save time / cost etc ? Any thoughts.
Many Thanks,
Now for your experience bit, can they be fitted with an LED driver x 1 per lamp as the MR16's had and an appropriate trailing edge dimmer module or as most lower wattage drivers seem to be non dimmable would that mean you can't do 1 driver per head and need to try and rewire through existing holes to group a few lamps to 1 higher rated dimmable driver ?
Option 2 I'm thinking of is just change fly leads all to GU10's and revert them to dimmable mains powered LED's to save time / cost etc ? Any thoughts.
Many Thanks,