Handy tools

[Wayne Gollop]

What tools do you have that you find handy. I'm looking to get some new tools and was wondering what you guys find useful. Other than the obvious!

 

[Essexboy7]

A little 3.5mm tap to clean out lugs on back boxes.A lifesaver on many occasions

 

[DNS1]

Hmm, the "obvious" varies a lot...

Here's my main kit....

- Wera 7 piece VDE screwdriver set
- Random other VDE drivers as backup
- NWS side cutters
- NWS croppers
- Draper rod set (yep, I was being cheap! Much better are available!)
- Ratchet crimper (mine is cheap, but has done the job for years!)
- Bosch 18V combi drill/driver
- Mini claw hammer
- Mini adjustable spanner
- string
- Big box of bits... (could be anything in there really! Usually mine contains Wagos, crimps, ties, clips, a condom just in case (keep it away from the nails and screws), choc blocks, tape etc...)

 

[babylonsBurning]

- Bosch 240v 250w multi tool, Recent purchase but finding loads of uses for it.
- 3.5 tap (as essex said).
- 2xAA Maglite (LED).
- RoughNeck Utility bar (great for board lifting).
- Dewalt Impact driver 18v.

 

[GT1]

Head torch.

 

[Wayne Gollop]

A little 3.5mm tap to clean out lugs on back boxes.A lifesaver on many occasions

They sure are!!

Hmm, the "obvious" varies a lot...

Here's my main kit....

- Wera 7 piece VDE screwdriver set
- Random other VDE drivers as backup
- NWS side cutters
- NWS croppers
- Draper rod set (yep, I was being cheap! Much better are available!)
- Ratchet crimper (mine is cheap, but has done the job for years!)
- Bosch 18V combi drill/driver
- Mini claw hammer
- Mini adjustable spanner
- string
- Big box of bits... (could be anything in there really! Usually mine contains Wagos, crimps, ties, clips, a condom just in case (keep it away from the nails and screws), choc blocks, tape etc...)

Why a mini claw hammer??
Box of bits!! I had to buy a 4 tier organiser. But it was the best thing I've done.
Im looking for the unusual tool that gets me out of a sticky situation or makes the job quicker and/or easier.

 

[bigbaddave]

Ive worked with a few tools... And they deffo not handy..

 

[KevinS]

Bosch oscillating multi-tool

 

[telectrix]

rotary stripper to take the sheath off flex without piercing the conductor insulation. got mine from cpc farnell.

 

[pinty]

apart from the obvious gash.............a pair of clear bolle wrap around safety specs ( cool ones )....had a nasty incident with spring loaded consumer unit screws once....always wear em when on't tools now lad..............and angry birds on your android fone...for the quiet times........head torch ...life safer....at least one in every jacket...tool belt......tool box....glove compartment.....I could go on......