Discuss how can i fix this i know i need matching brakers what ones do i need and how do i install a gfci ? in the UK Electrical Forum area at ElectriciansForums.net
-
Staff member
Esteemed
Arms
Supporter
You can go to Home Depot or Lowes and get a GE double pole GFCI breaker and install it in your panel. It will come with a white wire already installed so hook that wire up to the neutral bar. What ever size I don’t know since there is not enough information
Reply to how can i fix this i know i need matching brakers what ones do i need and how do i install a gfci ? in the UK Electrical Forum area at ElectriciansForums.net
Been asked to move, remove and add some sockets the kitchen and I’ll need to add a circuit for an electric hob.
Looked at the board and it’s one...
Hi
I have an electrician over and he took over from an incompetent builder. The builder already installed the wiring but the electrician told me...
First, sorry if I'm not in the correxct thread.
I'm trying to replace an old switch with a WIFI switch and cannot seem to do it right. There are...
Replaced our old 240v hot tub with a new one, which also uses 240v for motors, heater, etc, and 120v for low amp LEDs and touch screen control...
The breaker pictured trips with nothing plugged into the circuit. It is able to be reset and stays reset for several days, but trips again. When...