Long SDS bit storage

[rick]

How do you all store long (~300mm) SDS bits? I've been looking for a tool roll type thing but can't anything suitable.

 

[Flanders]

I use an off cut of wast pipe with gaffer tape over one end
Can fit a 16mm 20mm and 25mm in one 40mm pipe

 

[nicebutdim]

As above, but PVC pipe with end cap on each end. Speak to a friendly plumber if you don't want to buy a full length.

Got the idea from this plumber a few years back:

 

[littlespark]

I was getting lengths of mini trunking ordered through CEF and got delivered in cardboard tubes, so I use them for bit storage.

 

[mattg4321]

Offcut of rainwater downpipe fixed vertically against the floor at the end of my van racking

 

[DefyG]

I have a piece of rectangular ducting(100x50), vertically mounted in the van.

 

[Dustydazzler]

old superrods plastic tube

 

[rick]

Cheers guys good ideas there ?

 

[WallaceP]

4inch waste pipe, at the back door next to the wheel arch, got my long sds bits and cable rods there.

 

[telectrix]

40mm waste pipe with gorilla tape end stop. lie behind bulkhead with rods, handsaw,and various other bits I can't be arsed storing tidy.

 

[Julie.]

There was another thread on this

Case for long 600mm to 1000mm Drill Bits.

I am looking to buy a case for storing my SDS Bits in . As currently I’m using my car for work and would like a way of transporting them whilst working on the job out of the engineers van.

www.electriciansforums.net

 

[Flanders]

I was getting lengths of mini trunking ordered through CEF and got delivered in cardboard tubes, so I use them for bit storage.

Yes I have got one installed in my shed to keep all the garden cains in .

 

[Micktw68]

4” waste. Glued on cap one end , screwed on cap t’other.

 

[telectrix]

4” waste. Glued on cap one end , screwed on cap t’other.

Christ, how many long sds bits have you got? and you thought it was your van's axle that rattled. ??