Discuss Neutrals in light switch in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

why do a day's work when you can get some geordie to graft while you supervise?
 
To coin the phrase why have a dog and bark yourself. (Defending the Geordie Nation here lol)

**But here we go again 6 pages on how to terminate a neutral at a back box when doing 3 plate. Maybe with the font of all electrical knowledge; AKA inspector Oracle, and him bumping his gums, over this. Could of put those said gums to good use and crimped the ****ers, and insulated it with the **** that came with it too.~~

I am remaining neutral on this.... :)
 
bring in your cables through the top of your galv' back box, pop out a couple of the knock-outs on the back of the box, thread your neutrals out of the top one and back in through the bottom one - job done. don't forget to use grommits though.
 
bring in your cables through the top of your galv' back box, pop out a couple of the knock-outs on the back of the box, thread your neutrals out of the top one and back in through the bottom one - job done. don't forget to use grommits though.

Are you being serious here?? .....That sounds like a real pig's ear of a job!!
 
Are you being serious here?? .....That sounds like a real pig's ear of a job!!


hahaha. don't choke on your rice wine eng.

surely you don't have any issues with my fool proof solution for the op's problem??

if you do, take it up with the tutor on my 5 week course. but make sure you go in prepared - he's got a CSE in woodwork.
 
hahaha. don't choke on your rice wine eng.

surely you don't have any issues with my fool proof solution for the op's problem??

if you do, take it up with the tutor on my 5 week course. but make sure you go in prepared - he's got a CSE in woodwork.

i give that a 8 out of 10 on the trolling score card lol.

note ; rice wine = saki.
;-)
 
Wish I had the pictures of the one i visited the Neutrals and Earths together in the Galv back box Even had tape and a DNO tag on it LMAO.
 
hahaha. don't choke on your rice wine eng.

surely you don't have any issues with my fool proof solution for the op's problem??

if you do, take it up with the tutor on my 5 week course. but make sure you go in prepared - he's got a CSE in woodwork.

Well that just about sums up what to expect from a Electrical Trainee, as far as i can see!!
 
Mmmm I thought according to the new regs it was the cables that were supposed to be secured in the boxes not the connections so that there was no chance of strain coming on to the connections so why was he asking you to secure the neutral and not the cables them selves ? And will we be faced with new boxes with cable clamps in them to take them up to standard ? If all connections ha to be secured Waggos would have been a complete waste of money and I have just bought a **** load of them lol
 
I got called on this a few years ago by NIC inspector. He said wago's or crimps are fine but any screwed connection has to be securely fixed and not floating, same reg as requires joint boxes to be securely fixed according to him.
 
which is a load of bullpoo. if the cable is secured by clamp or by the fact that it's buried in plaster, then that satisfies the security of cables issue.
 
My thoughts exactly, but you just have to smile and nod until they sign on the line!
They do seem to have a daft little fad each year to pick on.
The year before I got a lecture on how the brown of the three core in a 2way should be used as whichever strapper has the permanent live on it, not in the common.
I tried to explain that the 2way switch he was looking at was wired from a jb with the common of one switch being live and the other common being switch live. He just ignored me and carried on with the lecture!
 
My thoughts exactly, but you just have to smile and nod until they sign on the line!
They do seem to have a daft little fad each year to pick on.
The year before I got a lecture on how the brown of the three core in a 2way should be used as whichever strapper has the permanent live on it, not in the common.
I tried to explain that the 2way switch he was looking at was wired from a jb with the common of one switch being live and the other common being switch live. He just ignored me and carried on with the lecture!

Aye well .... that serves ye right. Did yer Ma never tell you; NEVER argue with a lunatic or a policeman??
 

Reply to Neutrals in light switch in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Similar Threads

I have a rocker type light switch the sticks out bit too far and interferes with a drawer, as in the picture. The switch seems properly installed...
Replies
6
Views
639
First, sorry if I'm not in the correxct thread. I'm trying to replace an old switch with a WIFI switch and cannot seem to do it right. There are...
Replies
1
Views
321
I hope someone can help with this as I'm stumped. My landing hallway ceiling (2016-build house) has two rose pendants which I've attempted to...
Replies
7
Views
453
Hi I've been planning to fit an outdoor junction box at the front of my house to hide a large brickwork hole and properly house the wiring...
Replies
9
Views
890
Hi, I’m new to the forum. Thanks for letting me join. Asking for some diy advicd… I’m trying to add a couple more security lights to the existing...
Replies
1
Views
631

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock