No access to low voltage downlights transformers on EICR

[Ross1]

Evening Guys, got a house to do an EICR on and there is no access to the 3 plating/transformers on 12V downlights in 4 different rooms. Everything looks nice and pretty and shiny but its all been boxed in. the cut out diameters are to small to pull the transformers down so am unable to take any readings. Im not sure what to code this! Any ideas

 

[markc123]

LIM or N/V

 

[DJ Ovengloves]

The transformers are ELV...Extra Low Voltage ffs!

 

[telectrix]

think he's concerned about IR testing. only thing you can do there is link L to N and IR from these to E ( on the LV side, of course).

 

[markc123]

Aye, if you do what tel says for godsakes dont stick 500 down it lol

 

[telectrix]

oops, meant to add at 250V.

 

[Ross1]

Think LIM is the way to go and just do the L/N-E IR @ 500V. Don't think I`ll be doing it from the LV side though Tel...

 

[kingeri]

Think LIM is the way to go and just do the L/N-E IR @ 500V. Don't think I`ll be doing it from the LV side though Tel...

I would if I were you!

 

[DPG]

Think LIM is the way to go and just do the L/N-E IR @ 500V. Don't think I`ll be doing it from the LV side though Tel...

Look up defs for LV and ELV. Daz