Search the forum,

Discuss Not sure what our options are. Advice required for homeowner please. in the Australia area at ElectriciansForums.net

Post #28. The certificates are green.

This is from the NICEIC website: </title> <meta name="description" content="" /> <meta name="keywords" content="" /> <meta name="author" content="Farquhar Design and Julian Samuel Web Development" /> <link rel="shortcut icon" href="/Content/Images/niceicfavicon.ico" type="image/x-ic

"Click the titles to download pdfs of green specimen NICEIC certificates, which are issued by non-approved electrical contractors."

I'm with a different scheme operator. What on earth is a "non-approved electrical contractor"?

What is the domestic customer to make of that? Can any old tradesman get hold of these green certificates and issue them? Has our OP here fallen foul of that?
 
forgive me if i've misse dseomething as i've been away 3 days and just glanced through the posts. not read all of them. 1 post suggested that the problem may arise on selling the house. in this case, a PIR might be the answer. as i've said, i've not read all the posts so forgive me if this has already been suggested.
 
Eiluy68. He cannot take the certs to the NICEIC and 4-6 weeks later they issue you with 'real ones'. it doesn't work that way. However, somewhere in Approved document P (Yes. THE Part P). I think there is a way around this. Obviously (spinlondon, take note!) I havent got it with me, but somewhere in it theres a section telling you what to if you had an unregistered electrician who was qualified. Help me out someone. Have a leaf through Part P
 
Oh gawd. Here we are again. Spinlondon I bear no malice and do not want to anger you. Please accept my apologies for stating that 'You are wrong'. I was wrong to do that. And I fully understand what you were saying. There is no specific regulation regarding testing following a cu change. I know that. But on the other hand there is no specific reg stating that inserting a live conductor into the left nostril of a customer is not permitted! (should be in some cases though)
What I was trying to say was just because its not specified, doesn't mean you shouldn't do it. Personally think it comes under the bit about good workmanship and competent person, or whatever it says. Near the front somewhere. (No , I havent got the regs with me again. Got the nice green one the other day as well. Jesus!) It is open to interpretation, I think. You look at it one way, I another. Can we be friends now? Nice bike. Simon
 
However, somewhere in Approved document P (Yes. THE Part P). I think there is a way around this. Obviously (spinlondon, take note!) I havent got it with me, but somewhere in it theres a section telling you what to if you had an unregistered electrician who was qualified. Help me out someone. Have a leaf through Part P

You're right simonspark

Section 1.21 advises that when a qualified electrician who is not registered with a Part P self-certification scheme undertakes notifiable work, local building control should be notified in advance except when it's an emergency and then as soon as possible afterwards. The electrician can then complete the work and issue an appropraite BS7671 certificate, a copy of which should be sent to building control. Building control will take the certificate into account before deciding whether or not the work is safe and complies. They may also ask for proof of the electrician's qualifications. If they're happy they'll issue a building regulation completion certificate.

They don't say what happens if they don't accept that the work is safe and complies...
 
Hence eiluj68 you should give him a chance to explain and rectify and if that doesn't work it's time for lawyers because if the work is not safe and doesn't comply there'll be costs to have it fixed. And in that case those costs will be above the small claims thresholds. If he was dishing out green certificates he's unlikely to be qualified, insured and experienced to do PIRs, so have that initial chat and think about lawyers after that. Any other advice folks to round this one up?
 
I wouldn't show them that certificate you've got!!

I know you guys were discussing technical details of the certificate between you, but noone ever explained what it meant in layman's terms. Are you saying that it shows that the work is unsafe and/or that it doesn't comply? If unsafe it's a big worry!
 
Just read through all this thread....bloody hell!
Re-the testing of existing circuits on a cu change dispute.....if you are changing to a different protective device for an existing circuit you would have to ensure disconnection times are met by the new device,therefore at the very least a Zs test would be a requirement of bs7671.
 
Last edited by a moderator:
eiluj68, I don't think anyone will say it's safe or unsafe without carrying out the PIR. It's a sloppy report by someone that appears not to fully understand what they're doing. It's got some items of concern and the findings that are on the report suggest the installation doesn't meet the latest version of the regulations. You mentioned the kitchen and bathroom were left out of the rewire, those are 2 areas that have to be handled carefully so the question of safety cannot be answered without inspection and testing. He has a duty of care, as does every tradesperson that sells to the public, to look after you. I believe you've been let down in that the installer should have guided you on matters of notification and certification and hasn't done that. Don't panic, but get it looked at sooner rather than later.
 
Many thanks SW1970. That sounds like good advice.

It doesn't sound like there's any point in pursuing a completion certificate from building control based on the "certification" we currently hold.

On a positive note, perhaps this thread will be of benefit to anyone unfortunate enough to find themselves in a similar position in the future.

A final thank you to all who have provided constructive feedback on our situation :)
 
Try not to panic about safety issues with the installation
Domestic electricians can often do a first class job of the actual installation,then be total numpties when filling out certificates
I wouldn't be surprised if a figure of maybe 70 % are incorrectly filled out
The form filling in our industry ranges from small mistakes to a complete ineptitude and sometimes (especially with large Pir testiing firms)complete fabrications and downright lies

I will repeat my earlier advise,whats done is done as far as the installation and part pants is concerned
It would be the best course of action for all your issues, that a Pir be carried out, and preferably by an electrician qualified,experienced and with perhaps City + Guilds 2391 Test and Inspection qualification.if he is in a scheme as well as suitable,all the better,but dont be fooled by scheme membership or installation competence,it means very little when it comes to test and inspection

The guy doing the Kitchen may be suitable for this role and the certificatiion he will issue and the notification he will carry out will hopefully clear all your percieved problems
Again,try not to worry perhaps needlesly,but be sure to engage an electrician who ticks all the boxes for that Pir,
 
Christ on a bike this is getting complicated. The certificate that has been issued is a Electrical Installation Certificate (EIC) which is to BS7671. The fact that the certificate is green just means that it isn't the style of certificate that an electrician belonging to a self certification scheme (eg NICEIC, NAPIT, ELECSA etc) would normally issue. I know from being with the NIC that the Approved Contractor forms are red and the Domestic Installer forms are purple. Both the red and purple forms display the NIC logo whereas the green ones (despite being available to buy from the NIC shop) do not due to them being available for use by non registered members.

With regards to the details of the certificate that people have pointed out to be wrong i would say the following. There are discrepancies which may show that the contractor has a lack of knowledge when it comes to filling out the certs. This does not mean that his work is unsafe but we can't tell either way without seeing the installation and carrying out a full test and inspection. Filling out certificates can be a bit of a head ache for some contractors, infact i'd wager that everyone on this forum has made a mistake at some point or another through general misunderstanding or a lack of knowledge. Again this does not make them bad electricians it just means that they have a bit more reading to do.

Finally, my gut feeling is that you've caught this guy out and he is not a NIC registered electrician. At a guess, the reason he wants a copy of the certificate is so that he can get a mate who is NIC Approved or a Domestic Installer to fill out a new cert on the correct paper and register it for Part P. This is not allowed by the NIC or any other scheme provider as the work has to be signed off by the person who installed it. Just because this practice isn't allowed doesn't mean it doesn't happen! I would still go with my previous suggestion and get the LABC to test and sign off the work. That way you get your property tested by a competent electrician and the correct certificates with a Part P notification certificate too. I would still send a letter to the electrician detailing your grievances and requesting compensation to cover the costs for the LABC to certify the work. He may pay up, he may not, at that point you can either chalk it up to experience or pursue him further via the courts.
 

Reply to Not sure what our options are. Advice required for homeowner please. in the Australia area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top