Discuss Probably a stupid question. in the Australia area at ElectriciansForums.net

Reaction score
104
Why doesnt T&E cable have Reference Method E (perforated cable tray) listed in table 4D5 (page 340 green)?

Although table 4D2A does and says it's multicore cable with or without a CPC? What's the difference between this cable and T&E?

Thanks in advance.
 
It's probably missing simply because it's not a common combination - cable tray is predominantly used with singles in industry, whereas T&E tends to be more domestic.
 
What I mean is that you can only put so much ink on so many pages - I'm not going to check but I'm guessing that you probably won't find a listing for 400mm SWA using method 102, either.
 
Because 102 is only for twin and earth?

Is the multicore 70c thermoplastic sheathed with or without CPC similar to switchwire used on 2 way switches but without the CPC? Or is it round profile?

Thanks.
 
It's one and the same. L,N,CPC or L,L,L,CPC are all counted as 'multicore' as there is more than one conductor.
 
Can you clip t+e and just plaster straight over?NO!

You can if it's at depth and all the other usual conditions have been met, yes. You can set it in concrete if you wish, as well, and that's also method C.
 
Rough, yes it is, but allowed. All plastic capping does in reality is just protect the cable from the plasterers trowel.
 
Pull a new cable through capping? I'd like to see that, only ever really came across capping in London, o'er here the main choice is 20mm round conduit.
 
Fair enough it's allowed inside safe zones but bloody hell who actually does that?Rough!20mm conduit is my preference as well!Prob spend more time clipping the cables down the chase than you would sticking a bit of conduit in.At least then you can pull in cables later
 

Reply to Probably a stupid question. in the Australia area at ElectriciansForums.net

Similar Threads

Hi All I would appreciate some help with a few questions here regarding cables sizing, I'm using the latest 18th edition, amendment 2. Q1...
Replies
0
Views
917
Hi All I wanted to ask a question about the reference method. Passing wiring through holes made at 0.2-0.4 of the joist span. The cables passes...
Replies
1
Views
1K
Hi everyone. What's the correct reference method for cables (2.5mm t&e 32A? ring main) clipped to wooden joists between the ground floor and...
Replies
12
Views
3K
Hello, hopefully ive got this right but if someone can check over my maths for me, id appreciate it. Im needing to install a new supply cable...
Replies
3
Views
890
Apologies if this is in the wrong section - appreciate it's more of an educational question. That said I have 2391 - but the classroom environment...
Replies
2
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock