Discuss Quick quote. in the UK Electrical Forum area at ElectriciansForums.net

just quoting a job . 2 flats, partial rewire +. gave client a ball park figure (labour only) of £3000 - £4000 that's for 2 sparks and 1 mate for 5 -7 days. client says way too expensive.
 
just quoting a job . 2 flats, partial rewire +. gave client a ball park figure (labour only) of £3000 - £4000 that's for 2 sparks and 1 mate for 5 -7 days. client says way too expensive.
Depends what’s involved ?

if it’s one pendant and 2 sockets per room then £4000 is probably on the higher side

if it’s numerous downlights and multiple sockets per room then £4000 is probably cheap

have you tried pricing it ‘per point’ at around £100 per point ?
 
I’m in Guildford area but regular work around Cobham , Esther , Woking , Godalming etc

When I was at my busiest a few year pre covid , I was £30 ph and literally rushed off my feet doing 7 days a week nearly every week. It was manic. I was doing small jobs like the OP on a Sunday morning for about £160 Labour. I was super busy and the phone never stopped ringing…too busy infact. I never put 2 and 2 together and worked out I was super cheap and way cheaper than others in my area

I have increased my rates year on year since that very busy period and now maintain steady work but not flat out anymore

most wet pants , sparks , gas engineers I know are all in the same ball park of £60-100ph

my rate includes small consumables like wagos , boxes etc

I know others who literally bill the Client for everything down to the last pipe coupler
Nice to hear ? I’m just south of Godalming and pick a few jobs up round Milford, Witley and down to Haslemere. ?
 
Nice to hear ? I’m just south of Godalming and pick a few jobs up round Milford, Witley and down to Haslemere. ?

I used to do loads of work for a kitchen and bathroom company based out of Godalming back in the day , I even travelled as far as petworth for a few kitchen rewires

lovely part of surrey , some very affluent roads around

i re wired a couple massive houses in Frensham and Lower Bourne which isnt too far from you
 
Nice to hear ? I’m just south of Godalming and pick a few jobs up round Milford, Witley and down to Haslemere. ?
Out of curiosity are you CPS registered as I’m thinking of ditching mine at the next renewal and might need a 3rd party guy local for part pee ?
 
I used to do loads of work for a kitchen and bathroom company based out of Godalming back in the day , I even travelled as far as petworth for a few kitchen rewires

lovely part of surrey , some very affluent roads around

i re wired a couple massive houses in Frensham and Lower Bourne which isnt too far from you

Petworth is Sussex! Nearly on my patch there. I did a few jobs there a while back, but it’s too far for me really. I can travel to London outskirts in a similar time and usually get more money.
 
Petworth is Sussex! Nearly on my patch there. I did a few jobs there a while back, but it’s too far for me really. I can travel to London outskirts in a similar time and usually get more money.
My mistake , yes petworth is indeed sussex. Been a good few years since I have worked that far south
 
Depends what’s involved ?

if it’s one pendant and 2 sockets per room then £4000 is probably on the higher side

if it’s numerous downlights and multiple sockets per room then £4000 is probably cheap

have you tried pricing it ‘per point’ at around £100 per point ?
it's an awkward one .lights are to stay with any faults fixed, some additional lights to be added. living areas extra sockets and existing testing etc. all new front plates, kitchen and bathrooms all new, sockets showers, etc. 2 new CUs. customer supplying gear as he can get the vat back, i estimated 1 wek for me and another spark + 1 mate, but think that's too muck for 1 week. more like 10 days.that's where i'm struggling. pricef for 1 weekor 2? give him a window £4K-8k?
 
it's an awkward one .lights are to stay with any faults fixed, some additional lights to be added. living areas extra sockets and existing testing etc. all new front plates, kitchen and bathrooms all new, sockets showers, etc. 2 new CUs. customer supplying gear as he can get the vat back, i estimated 1 wek for me and another spark + 1 mate, but think that's too muck for 1 week. more like 10 days.that's where i'm struggling. pricef for 1 weekor 2? give him a window £4K-8k?
2 sparks you can probably crash that out in a week

price for a week for 2 sparks , I personally wouldn’t bother with the mate on this kind of job

would you be happy to walk away with 2 grand for a hard weeks work ?

if the answer is yes then stick your price in at 4 grand take it or leave it

keep in mind if you run over that comes out of your price , that’s why I wouldnt go much lower
 
2 sparks you can probably crash that out in a week

price for a week for 2 sparks , I personally wouldn’t bother with the mate on this kind of job

would you be happy to walk away with 2 grand for a hard weeks work ?

if the answer is yes then stick your price in at 4 grand take it or leave it

keep in mind if you run over that comes out of your price , that’s why I wouldnt go much lower
problem is that i am no longer physically capable of heavy work. I'd be doing some of 2nd fixing, the CUs and testing. therefore most of the hard graft would be spark #2 and the mate.
 

Reply to Quick quote. in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I need your help please once again in tracing a fault. Am DIY but not clueless. Converting former kitchen into 2 rooms: bathroom and laundry. The...
Replies
24
Views
2K
Hi all, I am a new home owner and have had a quote on some electrical work I wanted done in my home. I was wondering on if someone could give...
Replies
20
Views
3K
Good Morning, I've used this forum for advice many times but this is my first time posting so I hope that this community can help! We're...
Replies
5
Views
1K
Hi all, Im new to the forum and wanted to check something and maybe get some advice confirmation. Ive got halogen wall lights which use a...
Replies
6
Views
1K
Hi Guys I'm not a Hager user so hence the question. I've been asked to wire in lights and a fan etc for a bathroom for a mate of mine who's a...
Replies
6
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock