**Show Us Your Installs!!!**

[Spudnik]

Right chaps,

Due to a few unavoidable issues, we have lost the original thread and pics etc.

Sorry about that!!!

So, if you want to re-upload your pics then great, if not, give us something new!


Cheers!!

 

[sedgy34]

Richard
He's a college student that's why

 

[Amp David]

joker, if your going to post your install expect some constructive :30:

Lighten up chief. He is right TBH, 1100mm above the worktops is quite high.

 

[Amp David]

yes they are bang level..... had the laser running accross it every step of the way...!!

unfortunately the heights and positions were dictated to me by client... including the product spec "crabtree"

Worktops must be on the squat then :90:

 

[DurhamSparky]

That would. It surprise me. !!! Floor wad on a slope as well

 

[trbod]

Yes but even a Plumber could pass Part P...Oh....:stooge_moe:
Sorry, nice bit of work there, well done.
Just interested in why it is wired partly in singles and partly T&E?

Not a plumber I have proper well earnt qualifications thank you very much

- - - Updated - - -

Yes but even a Plumber could pass Part P...Oh....:stooge_moe:
Sorry, nice bit of work there, well done.
Just interested in why it is wired partly in singles and partly T&E?

Not a plumber I have proper well earnt qualifications thank you very much

 

[James Dalby]

Nice!!!!!

 

[cossie400]

Just a couple from a recent comms rm install including UPS (bypass next to main panel board)

 

[patrickzs]

Good Stuff

 

[Eco Chap]

First experience with cable tray. Thoughts and opinions from more experienced cable tray installers much appreciated

 

[pennywise]

Probably wouldnt have used the deep sided stuff and used some stand off brackets or strut to make cable tieing easier. Nice and neat though

 

[Robotstar5]

Nice job for a first attempt, why didn't you put a vertical run in to collect the cables between the 2 enclosures? less drilling than all the cleats!. As above I would have used shallow (20mm) unistrut bars to mount it on.

 

[alarm man]

Nice job for a first attempt, why didn't you put a vertical run in to collect the cables between the 2 enclosures? less drilling than all the cleats!. As above I would have used shallow (20mm) unistrut bars to mount it on.

as rob says,abit of tray for the other cables would have looked much better,it looks like someone has come in after your work and just drilled theres to the wall,with pic 2 a small internal bend then a tee would have again looked nicer,but as a first go its worth a b+...

 

[RSrmelectrical]

Good install but should the tails not have been changed

 

[HandySparks]

Good install but should the tails not have been changed

Welcome to the forum.

To which of the previous 352 posts are you referring?

 

[Thefailsafe2012]

A Db I never got to finish

 

[Silly Sausage]

A Db I never got to finish

How come?

 

[Thefailsafe2012]

How come?

Ahhhh building company went down the pan and all trades booted off site, that was back in June and were still not sure if we're going back, it was a pig of a job but I would have loved to have finished it.

 

[RSrmelectrical]

Hi looks nice are you also fitting AC in the room?

 

[Knobhead]

Just dump them and bury them!

 

[Resu]

Think your on the wrong thread mate, possibly wrong forum? haha resents2: