Discuss Stopping static discharge off vehicle in the Auto Electrician Forum area at ElectriciansForums.net

It may not be the van as such, it might be a new seat/carpet/etc that is quite high insulation resistance and you are getting charged up inside. If you pull up and someone else comes to the vehicle before you get out, do they get a belt?

If not it is an internal triboelectric issue.
 
It's usually clothing fabric rubbing against seat fabric that builds up static charge.
 
The only clothing I’ve changed is my shoes.
And it’s since buying a newer van, I’ve noticed the problem.
The van is same make and model of old one, just 6 months newer.

so is it me charged with static and earthing through the van? Rubber tyres are an insulator surely??
Or is it the van charging up, and earthing through me?

I think the former, as I get same from the house door handle...
 
I think the former, as I get same from the house door handle...
That suggests it is you!

Look at safety trainers, etc. Not only do they offer protection against some work hazards, often they are anti-static soles to avoid sparks in explosive atmospheres.

Ah, I miss the Saturday curry...
 
I found I was a more snug fit ,in newer vehicle .
Causing me to slide more across seat.
.. If you are not tall ,try sliding the seat back on arrival as a test ... more of a climb/bounce out !
Finding metal to touch ,before shuffling ,
as @Vortigern mentioned . Was my final cure !
New seat does seem to eat me a little more
 
I would say shoes could be the issue, I get the most vicious shocks off my Vauxhall if I wear my comfy loafy about shoes. With my work boots on never had a problem with it! I only realised what it was today partially because of this thread and cos it had me a belter today at a customers, realised I had turned up there in my comfy shoes not my boots! Doh!
 

Reply to Stopping static discharge off vehicle in the Auto Electrician Forum area at ElectriciansForums.net

Similar Threads

I experienced an electrical shock while replacing an A/C Fan Coil's 120vac, single phase motor that was above the ceiling grid in an office, while...
Replies
46
Views
4K
Hello all, I hope someone can help me out, I only work part time domestic (as a sole trader not ltd) as I have a full time office job as an...
Replies
11
Views
3K
We have this Swiss-made Dixi horizontal borer from 1957, very nice machine still with its original DC variable voltage drive. In those days there...
Replies
9
Views
2K
While sorting out some issues with immersions at a flat yesterday, I ran into something that seemed peculiar (to me at least). Immersions need...
Replies
1
Views
1K
At our church, one of the things I've done is sort out the heating wiring (as best I can for now). The schematic is as shown below. The theory...
Replies
2
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock