Hi - I have just wired a 7 pin towbar using supplied harness kit with by pass relay . (2012 Megane Coupe)
1 issue discovered is my LED indicators on trailer remain permanently lit with dull glow? ( Checked trailer lights with another vehicle & lights are OK )
Otherwise lights works ok including flashing indicators/both sidelights & brakelight.
I have verified connections and supply feeds from lights as OK etc.
I have checked using meter & theres 12V at yellow & green wires (indicators) once bypass relay is connected causing this "glow". Yet this doesnt light up my circuit tester bulb tool that i normally use?? CAnt understand why??
One other smaller qry is pink wire from kit to do with reversing sensors which Im unsure of how to wire in... Dont think it contributary biut again advice would be aprreciate if possible
Trevor
1 issue discovered is my LED indicators on trailer remain permanently lit with dull glow? ( Checked trailer lights with another vehicle & lights are OK )
Otherwise lights works ok including flashing indicators/both sidelights & brakelight.
I have verified connections and supply feeds from lights as OK etc.
I have checked using meter & theres 12V at yellow & green wires (indicators) once bypass relay is connected causing this "glow". Yet this doesnt light up my circuit tester bulb tool that i normally use?? CAnt understand why??
One other smaller qry is pink wire from kit to do with reversing sensors which Im unsure of how to wire in... Dont think it contributary biut again advice would be aprreciate if possible
Trevor