Discuss Welding equipment - DNO permission? in the UK Electrical Forum area at ElectriciansForums.net
The question exists on all the applications I've ever made in SW England. Last one about ten years ago.I've had Stick, Mig, Tig welders and plasma cutter, in various forms all Diy spec, for over 30yrs, in the U.K first I've heard of it.
Maybe different in Ireland.
It is really not something I know that much about, but I get the impression most folks buying a "welder" now are smaller MIG/TIG style devices with thin wire and (presumably) significantly lower current / power involved. So might also be less of an issue for domestic work at both ends of the problem?180A arc welder used to cause a noticeable flicker with incandescent lamps in our property, but I've not noticed the same with fluorescent or LED, so now a historical problem only.
Reply to Welding equipment - DNO permission? in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.