Discuss When you haven't got a cable joint kit in the UK Electrical Forum area at ElectriciansForums.net
Share this page
S
Silly Sausage
Bet it was bone dry inside though!
D
Deleted member 26818
Thought the EZ-Thump12 produced 12kV?
OP
Smithy33
-
- Reaction score
- 10
Indeed it does, however 6kv is plenty to get a good discharge on an LV cable without causing other faults on the circuit.
Reply to When you haven't got a cable joint kit in the UK Electrical Forum area at ElectriciansForums.net
Share this page
Similar Threads
Hi all,
I was thinking to use heat shrink to strengthen usb cables where the cable enters the connector. I find the insulation starts to crack...
Hi, we need to joint several 95mm² 4 core SWA cables, the joints kit are Prysmian JST Low Voltage Universal Cable Joints and are supplied with...
So was on a call out today and cooker circuit kept tripping the RCD. Disconnected at the board and at the cooker switch and IR’d the cable and...
I had an interesting little job this morning.
Three sockets in an extension were not working and haven't worked for quite some time (years).
It...
Strange on this, we are wiring an extension at the moment and I would like to 3 way the (currently 2 way) landing switch to the new bedroom so...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Is it possible to put a 16mm swa on a 40a mcb protected by an rcd
- Latest: brianmoooore
-
-
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.