I
isparky
Hi all, after a bit of advice. I have carried out a C/U change and of course a full test and inspection of the installation. In the bathroom there is a spur which is approx 2.4m from floor, but in line with the edge of the bath. It used to be for a heater but a plumber has now re-used the spur for the boiler. Am i right in thinking that because it is above 2.25m and outside the zones it is ok? The only thing i can find on sockets etc is that it must be 3m horizontally from zone 1. If it does not meet the regs is it a case of registering this on the electrical installation certificate in the comments section or moving it completely should the client wish to pay?
thanks
ben
thanks
ben