leads

Recent contents Top users
  1. B

    Circutor power analyzer AR5-L-all leads, software, bag etc free motor tester!

    Hi all, I have a brand new circutor ar5-l power analyzer for sale I have all leads, software, carry bag, charger and all the bits that come with it. link to spec here-http://www.circutor.com/docs/ft_m8_gb-ar5-l.pdf I will also throw in a power boss solo motor tester and a light lux meter! It...
  2. kingeri

    Robin KTS 1630 test leads

    I'm desperate for a set of test leads for my Robin KTS 1630. The one I particularly need is the live test lead, the thing stopping me using a generic set is the round three-pin connector at the tester end, this seems to be extinct on modern testers. Any ideas? At the very least I could do...
  3. C

    Socket adaptor

    Can anyone recommend a good socket adaptor for doing r1+r2 readings etc? I bought a kewtech one but it doesn't work with my megger 1720 leads unless you wiggle them about and even then it's unreliable!
  4. rich.250

    Fluke 1651b

    Hi all, My fluke tester has just started giving funny readings on continuity I.e 72 ohms for open circuit. I've checked it on my check box and they are all out apart from zero.... Just wondered if anyone else has had this problem?? Looks like ill be sending it off tomorrow lol Thank in advance Rich
  5. D

    Size of leads within DB...

    This might be a stupid question, but I've never really thought about it before so thought I'd ask anyway... Does anyone ever consider the sizing of manufacturers leads within a consumer unit? Working on a bog standard domestic installation with a 100A cut-out fuse and 25mm tails. No problem...
  6. J

    METREL METER FAULT? METREL Easitest MI3000

    Hi All, Anybody have a METREL meter thats trips RCD on triplock setting when Zs is taken? The fault seems exclusive to the probes lead. The coiled socket lead is not affected and is producing normal readings. My friend also has an earlier METREL meter (not sure what model) which has exactly...
  7. P

    three phase sequence testing

    Hi guys, as the title suggests just trying to get my head round three phase sequence testing, if I understand it correctly this is confirm that the three phases are in sequence.....obviously :) Now as I understand it this is obviously a live test and a three test leads are connected to L1 L2 L3...
    • Pondy
    • Thread
    • connected leads obviously phase sequence testing three three phase
    • Replies: 12
    • Forum: UK Electrical Forum
  8. D

    End to end fault?

    What fault has occured when you get >2000MOhms for your rn reading?
  9. N

    fluke leads question

    I want to replace my 1653 leads with the newer fluke twist tip leads, however I cannot for the life of me find a set of 3 Do they only come in red and black? And if so why don't they do a green?
    • nadger
    • Thread
    • black fluke green leads question
    • Replies: 5
    • Forum: UK Electrical Forum
  10. S

    fluke 1652 multifunction tester

    Hi, quick question, Do the test leads need to be nulled for ze & pfc. I have been told they don't as there resistance is negligible. Cheers
    • soulman
    • Thread
    • continuity fluke leads multifunction multifunction tester tester tests
    • Replies: 6
    • Forum: UK Electrical Forum
  11. Soulsurfer

    Kewtech full installation test meter kit...

    Full set of Kewtech inspect and test meters, 3 week old leads set and PAT TESTING ADAPTER Bought every optional extra lead I could get including dist board short out jump leads for R1 + R2 etc... with PAT adapter cost over £200 without one of the 3 test meters !! 1 x KT35 1 x KT42 1 x KT56...
  12. Soulsurfer

    Kewtech full installation test meter kit...

    Full set of Kewtech inspect and test meters, 3 week old leads set and PAT TESTING ADAPTER Bought every optional extra lead I could get including dist board short out jump leads for R1 + R2 etc... with PAT adapter cost over £200 without one of the 3 test meters !! 1 x KT35 1 x KT42 1 x KT56...
  13. Soulsurfer

    Kewtech full installation test meter kit...

    Full set of Kewtech inspect and test meters, 3 week old leads set and PAT TESTING ADAPTER Bought every optional extra lead I could get including dist board short out jump leads for R1 + R2 etc... with PAT adapter cost over £200 without one of the 3 test meters !! 1 x KT35 1 x KT42 1 x KT56...
  14. S

    multiple extension leads c2?

    Hi can any one help me been doing a lot of tests lately and found only single sockets in properties. 1 property had about 3 extension leads plugged in together running right in front of the door i put this down as a fire and trip hazard giving it a c2 am i right on this or not? thanks for your...
  15. J

    WANTED - Fluke Multifunctional Tester leads

    Anybody got any leads they don't want? If there in good condition. PM me. Cash waiting.
  16. S

    RCBO fly leads

    Heres a debate for you, seeing as this place is as dead as a doornail today. I have been testing a street of domestic properties recently, wired in 2008 with all rcbo's. In some properties the electrician has put all the white fly-leads into one terminal in the earth bar, In the others they...
  17. P

    megger 1720 cables

    Hi guys and gals, Got a Megger 1720 just bought a Kewtech FC 3000 "checkbox" off eBay but me Megger cables won't fit in the 4mm test holes. Anyone know of a cable set that will do the job without spending a lot. Only need this to keep NICEIC happy etc. Thanks in advance.
  18. NDG Elecs

    GS38 leads keep fusing....never used too though..

    Hi Folks, I have my first 'competent person' assessment in a couple of weeks and am starting to stress a bit! Problem I have is my GS38 leads keep blowing. For a Megger1552. They never used to do this. Have been using the same box of 500mA HRC fuses for ages, but cannot do any live tests...
  19. Davehaywire

    new megger

    has anyone else used the new megger multifunction tester,what do you think of its features?
  20. J

    Testing RCD,s using 3 leads or 2?

    When testing an RCD/RCBO is it proper procedure to have test leads on line neutral and cpc? or is a 2 lead line and cpc test ok? basic question i am sure but just want to make sure i am doing things properly. thanks james
    • jamesBoater
    • Thread
    • leads rcd testing using
    • Replies: 9
    • Forum: UK Electrical Forum

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock