result

Recent contents Top users
  1. R

    Ze result on a TN-S strangely higher than normal.

    Attended a 1st floor flat in a council block today and found a supply head inside a mantel cabinet where the earth was connected around the outside of a conduit housing the main supply cables before going into the cutout. Also coming out of the bottom of the cutout was another 6mm2 earth which...
  2. F

    Fluke err 5 how to obtain a result anyway

    Hi Have a new 1652B fluke multifunction meter Nearly returned to fluke as ERR 5 kept coming up on 3 different locations when doing loop test, (this is due to apparently a noisy earth) as i explained to supplier everything unplugged why would this happen? the ANSWER is to get ERR 5...
  3. R

    2394 Resut

    Result came through this morning from the December exam. Passed. Get in :hurray:
  4. Majid Khan

    Schedule of test result and schedule of inspection

    Hi guyz, Why do we need to complete these certificates? thanks.
  5. J

    2394 Practical & Notification of candidate results

    1. Once you have taken the 2394 practical test, when should you receive the "Notification of candidate results"? 2. For instance, with the 2394/2395 Multiple choice, you can receive the result straight away (from the centre), & the "Notification of candidate result" is then sent to you. Is this...
  6. driverman

    EICR schedule test result form filling

    Hi Guys, Taking 2395 exam shortly. Im just wondering on schedule of test results form what do I put down for size of cpc for MICC cable and for SWA cables if the armour is used solely for the cpc? I'm sure that somehow there must be procedure. Many Thanks
  7. S

    What a normal r1 = r2 result should be on a light circuit

    Hi, I just done a job today and got some reading of 7ohms, on continuity of a light circuit (B6 CB) this is the highest I have yet seen is this still ok? Or is this a problem? Cheers
    • scintillasam
    • Thread
    • circuit light normal point result start switch value
    • Replies: 24
    • Forum: UK Electrical Forum
  8. D Skelton

    NIC and the result of their indoctrination!

    I'm so gutted I didn't take a picture today! Whilst visiting one of my guys on site (domestic) he took me to one of the back rooms of the house to show me a socket outlet that had been wired by one of the local NIC 5WWs a few years back. What I saw next was one of the worst things I have ever...
  9. M

    Circuit details and test result forms.

    Hi all. Does anyone know where to download or have any blank circuit detail and test result forms. Thanks
  10. S

    Ze result different from a few months ago.

    Just carried out a ze on a tt istallation and got a reading of 156 m ohms, carried the same test out a few months before and got 132 m ohms, the zs results were slightly higher as well! Could this be due to the changing conditions of the weather as to we're the earth rod is placed. Thanks chris
  11. B

    which Ze result should you record

    if you have a sub main to upstairs flat should you record the Ze at the incomer mains or the comsuner unit in the flat?
  12. O

    NICEIC Certification Scheme NICEIC do they know something we dont

    Q & A of the Day – What departure Code to use for this lighting test result? - Voltimum UK - Electrical Installation Products and Contracting If you click on the link to the Votimum site the Q&A of the day I guy asks a question about testing a house light circuit for a PIR and NICEIC advise...
  13. P

    Testing question following successful 2391 result

    Hi all I passed my 2391 about 6months ago and thought I was flying, I know test procedures & how to carry out the tests like the back of my hand and I fully understand any results I get and how to rectify or diagnose any faults in a electrical system.....but then again I have only tested...
    • p11jor
    • Thread
    • 2391 current following phases question result supply system testing
    • Replies: 4
    • Forum: UK Electrical Forum
  14. R

    Dead Testing Results

    Hello all, i have some dead testing to do, i just have a new megger Robin KMP3075DL and when using it in Insulation test mode (500v - 20Mohm) on 2.5 twin + earth as practice, i test between LINE and CPC and get the reading from the display (up arrow 1) so on my schedule of tests sheets what...
  15. C

    Insulation Resistance testing - again!

    Hi Getting used to Metrel tester and am getting used to testing and was just after advice on clarifying some points: 1 - FCU's with neon indicators on IR tests - whats the best way of disconnecting the neon lights on these if they cant be disconnected? Do I keep that particular FCU switched...
  16. E

    Smashed it !!! what a result in June so far

    Check this system out Trina 235w x 17 Solar edge SE4000 and 17 x Power optimizers south facing Aberdeen scotland NOTE READING FOR 20th MAY ..... 29.32 KWH in one day WOW WEEEEEEEEEEEEE has any body witness higher than that ? 424 kwh already in MAY ................ the owner...
  17. N

    Newbie help with Zs test result please

    Hi New to trade and 1st post – any help/advice appreciated Testing DIY installation approx. 10 years old. Final circuit for sockets – a radial (not ring) wired in 2.5mm T&E protected by 20A mcb to BSEN 60898. Not logically wired, several JBs in loft and a number of spurs so not easy to...
  18. D

    what a result for chelsea

    bit lucky with the penalty miss and offside goal but well done
  19. M

    Solar result!

    regestered for our MCS last august got qms sorted but with one thing or another tarriff changes, new baby,mowed out with electrical work we never got any further, so thought id kick it to the kerb after listerning to you boys in the game. asked napit for a full refund hadn't heard anything for...
  20. D

    Result ! ..............SMA \ Sanyo Solar PV setup seems to be performing well

    Please to state that my stated 2.88kwp system managed to peak over 3kw the other day for a few mins under normal weather cons ..... hopefully to be a more common sight in the coming weeks...... Happy days............

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
UK Tiling Forum
TilersForums.co.uk
Tilers' Talk
Contractor Forum
DIY Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock