Hi Guys,
I have two ceiling fans and a speed control unit which switches on the fan and allows you to control the speed of the fans. Speed Control Unit Model is RV-05 2A max, 480W - with Forward / Reverse and OFF switching.
I only have T&E from the switch to each fan (2 x Switched Lives which...
Poorle
Thread
ceiling
control
controller
fans
industrial
issue
speed
switch
switched
hi,
Just reading through 'Connections' (ELECSA's magazine).
Found an article saying it was aright to use the green/yellow for a SL in a class II fan if you sleeved it both ends with a brown sleeve.
They cited 514.4.3 which in my book refers to PEN conductors saying it overrides 514.4.2 (thou...
Hi guys,
I have a strange one. I was called to a property recently to an intermittent alarm on a heating fill set (mikrofill EFD). I have fitted many of these in the past with no problems. I contacted the manufacturers who advised me that the fault could be interference on the circuit due to...
Have been called to a recently installed installation. Customer noticed one of the GLS BC LED lamps was glowing when turned off. Here are the facts:
Circuit tested - all tests appear normal.
Wired with feeds at the switch.
All lamps are LED
Measured voltage when lights switched on is...
matt_bei
Thread
light
light switch
lights
measured
normal
pendant
switch
switched
voltage
hi peeps, im installing 12 downlights in a kitchen, im ok with the wiring of the down lights, but im having trouble working out how to wire from the downlight to the switch!! im running 2circuits, do i need 3core+cpc or 4core please help somone!!
markbaldwin
Thread
common
downlight
first
switch
switched
switching
though
Hi guys,
Sorry about the quality of the picture. Note the connections outgoing from the teleswitch to the isolator. Can anyone confirm what the two supplies to the isolator from the teleswitch are for (the isolator out serves as the line supply to the heating contactor coil.
See Post#4
Have seen two types of double gang socket outlets, single pole and double pole. Not sure what the difference is. My guess is one is for use on a spur and one for a ring final but would like a definitive answer. Thx
Seank
Thread
difference
double
outlets
single
single pole
socket
switched
switches
Hello everybody
i came across a nice fault/problem today, I changed some GU10 lamps for the LED kind and they are lit dim while switched off. I have installed 2 new circuits These are the circuits the LEDs are on (1 in a extension and 1 up stairs in the older part of the house) I know these...
Karl Andrew
Thread
led
led lights
lighting
lights
switch
switched
while
Hello all, while i was away, the RCD kept tripping intermitantly at the house which my mum rents out, so the letting agent got their electrician to go round and he couldnt find the fault so he changed the RCD for a main switch as a temp measure.
When i got back i went round and installed 2...
I've got a customer who wants an outside light removing and a replacement installing about 4 metres away on the same wall. The location where she wants the new light happens to be directly behind the relevant lightswitch.
Is it acceptable to do the following?:
1. Remove existing light.
2...
Hello fellow sparks, how are we ?
I am slightly embarrassed about asking this but here goes,
I have never realy understood why you need a 3rd core when wiring smokes, live, neutal and earth i get, but why do you need a switch wire exactly,
what is its job ?
jamestaylorchat
Thread
alarm
other
smoke
smoke alarm
smokes
switch
switched
third
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.