Hi I'm new here and an apprentice at the moment so forgive me if I've posted in the wrong place ! Sorry.
I have just been doing wiring bays at college reference one way lighting, 2 way, 2 way intermediate etc and all with feeds and Neutrals looped through the switch boxes at the wall. I have...
Mr Zogs
Thread
led
light
lighting
lights
problems
switch
switched
wiring
Hi all new here just need some help and I am not a electrican
i have LED's gu10s when I turn the swich on it is not a dimmer and it is the swich that was in when we had halogens thay flicker and thay may have been on a 30sec or so then will do the same when I also but the indution hob on it...
This one v strange.. Couldn't verify it because an ex client rang me up. I had changed his fusebox for the usual dual RCD setup, no problems on installation or testing, about 10 months ago, he was fitting some lights himself but he says he was fitting led lamps into downlighters in hallway...
hi all, having an issue at work where the heating wont turn off. wiring is all ok and been tested, the stat is switching fine although it is reading 24v at the switched live at the stat when its turned down which im thinking is a backfeed from the boiler of some kind.
Have replaced a few stats...
weep
Thread
230v
24v
backfeed
boiler
possible
programmer
room
switch
switched
switching
voltage
wiring
Hi all, I bought some E14 LED bulbs and when I switch them off they still emit a little light. There is no leak from the switch. I found out that a few friends also have the same issue.
Any ideas why this could be happening?
I have a double plug socket in wall behind tv in lounge. The socket has a four way extension plugged in and this is itermittenly flashing with a bang. I have switched off tv plus switched off at socket. I was told it could be fuse in plug of extension so changed fuse. It nanged again tonite so...
fliss
Thread
bang
double
extension
flash
lounge
plug
plugged
socket
switched
Good Evening,
Has anyone had any dealings with the above?
We have 4 in a corridor on 1 lighting circuit.
The fittings are supplied as a maintained fitting but have a recommendation to only switch occasionally. I have wired as non maintained, there double insulated fittings so just a L&N at...
Hi. (I hope this is the correct forum - first timer looking for advice.)
I want to replace an existing security light with a new one. The existing light has a switched live, allowing it to be switched (from a 1-gang 1-way wall switch) either so that it is permanently on or so that the motion...
After installing some LED fittings in a bathroom and disabling an electric shower circuit I carried out a check on the whole installation. All fine until I used my Di-LOG probe to probe the switch plate screws to check that I had not pinched any live wires in the light switch back boxes around...
Sting Ray
Thread
between
earth
light
light switch
switch
switched
terminal
voltage
volts
I have been asked to get the emergency lighting working at a nursery. They had a switch put in at the entrance to the building that switches off all of the lights in the building when they lock up at the end of the day. All lighting circuits are hanging off a contactor connected to this switch...
I am planning to have an external PIR powering 3 soffit LED light fittings.
Here's where it gets (mildly) interesting, client wants there to be two options, to have them permanently on or to have them just on the sensor.
The way I have first fixed this is... (CPC omitted for clarity) Perm L...
Hi,
I have a 32A TP&N MEM Switched Fuse, I really could do with a 63A.
Question, can you just change the fuses? Or do I need to buy a whole new unit?
If need a new one, is anyone selling one?
Also, I have 10mm tails into the 32A unit, can I get 16mm into the 63A does anyone know?
Cheers.
Hi,
08:30 this morning, plugs not working, ive been decorating and pulled plugs forward...
Yeah ok, be there shortly...
Every socket in the house was pulled forward, all on radials, only one leg in every socket, so probably mounds of junction boxes under floors.
I said hmm, probably just...
Hi
Ive been searching everywhere to confirm with regulations that you are able to install a fused spur outlet off the downstairs ring for an electric fire (which is only to be used for the flame effect it provides not for heating as have central heating) and a LED Driver for a strip light...
Can any one help and give me some advise please :)
I have a lighting circuit which as a pir sensor on, a porch light, an led outside light and a halogen outside light. I wanted to replace the oitside halogen light for another led outside light. So I did and now all the lights flicker when...
scotthayes14
Thread
causing
flickering
led
lighting
lights
switch
switched
Customer has a movie room in their house 2gang dimmer switch with 4x 9w led downlights on one dimmer and 2x 12v halogen wall washer downlights on the other dimmer
halogen has standard dimmer switch and leds have appropriate led dimmer as recommended with fittings no problems with dimming all...
Hello all, in need of some advice. I have just installed 14 downlights (two circuits of 6 and 8) in what used to be a living room and dining room - the wall has been knocked down in between the two and rsj put in. I have wired for 2 gang two way switching at either end, so either side of the...
skamuk
Thread
dimmer
dimmers
either
slave
switch
switched
wired
wiring
The wiring in the house is split into separate circuits each with their own RCBO for
3 for lighting (separate for ground floor; upper floor; and basement)
3 for power (again as above)
1 for cooker
1 for shower
2 for fridge/freezers
The problem exists only on the ground floor power circuit...
pads
Thread
floor
keeps
rcbo
separate
switched
tripping
trips
without
Hello everyone,
I want to build a lamp with 2 different light bulbs. There can only be one light bulb switched on because otherwise the driver will become way too hot. So I want to make a switch that immediately switch a light bulb off when the other one is switched on. As you can see I don't...
tgoss
Thread
because
driver
light
light switch
position
switch
switched
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.