gm1984
DIY
- Reaction score
- 0
Hi,
I've just bought a new built-in 3.4kw oven = 14.8A @ 230v. I'm getting 245v so actually 13.8A.
Existing oven plugs into single socket fed from 20A DP switched fused spur.
Ring is small (3 double sockets) with 4 x 20A DP switched fused spur single sockets (oven, washer/dryer, dishwasher, fridge/freezer). B32 MCB protection in consumer unit, all wiring 2.5mmsq clipped.
Was wondering can I just change oven socket to a 20A flex outlet plate or do I need dedicated supply/run to hob cooker plate both of which a pain?
I've just bought a new built-in 3.4kw oven = 14.8A @ 230v. I'm getting 245v so actually 13.8A.
Existing oven plugs into single socket fed from 20A DP switched fused spur.
Ring is small (3 double sockets) with 4 x 20A DP switched fused spur single sockets (oven, washer/dryer, dishwasher, fridge/freezer). B32 MCB protection in consumer unit, all wiring 2.5mmsq clipped.
Was wondering can I just change oven socket to a 20A flex outlet plate or do I need dedicated supply/run to hob cooker plate both of which a pain?