Discuss Adding a spur to an existing circuit on a BS3036 CU in the UK Electrical Forum area at ElectriciansForums.net

Generally with a 4 year apprenticeship

I got me an apprentaship, best way to describe most of the guys is.

Dodgy dave, neville and an adhd midget.

Its a great apprentaship with our own monkeys in house to show you the wrong way so you't have don't have to make the mistake XD

A lot of bms work so see a lot of crap hit the fan so need to constantly re purposes cables, add more, deviate from panel drawings because it needs panel mods but no one nows what because they havent been delivered to site yet.
 
I got me an apprentaship, best way to describe most of the guys is.

Dodgy dave, neville and an adhd midget.

Its a great apprentaship with our own monkeys in house to show you the wrong way so you't have don't have to make the mistake XD

A lot of bms work so see a lot of crap hit the fan so need to constantly re purposes cables, add more, deviate from panel drawings because it needs panel mods but no one nows what because they havent been delivered to site yet.

Hu??
You on the drink?

Boydy
 
I got me an apprentaship, best way to describe most of the guys is.

Dodgy dave, neville and an adhd midget.

Its a great apprentaship with our own monkeys in house to show you the wrong way so you't have don't have to make the mistake XD

A lot of bms work so see a lot of crap hit the fan so need to constantly re purposes cables, add more, deviate from panel drawings because it needs panel mods but no one nows what because they havent been delivered to site yet.

Forget the apprenticeship and take an english course.
 
New posts

Reply to Adding a spur to an existing circuit on a BS3036 CU in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I’ve had a disagreement with one of the Engineers in work. So we are doing an install. Installing an Intruder Alarm. Rather than go with my...
Replies
48
Views
6K
Been asked to move, remove and add some sockets the kitchen and I’ll need to add a circuit for an electric hob. Looked at the board and it’s one...
Replies
17
Views
782
We have an outdoor socket that is hard wired into the ground floor power circuit and protected with an rcd in the consumer unit. I now plan to add...
Replies
17
Views
3K
Please advise what I should test / check next. My usual qualified electrician who did all of the work here is in Ireland for 4 weeks and not...
Replies
45
Views
3K
I have a working circuit setup connecting the CU to a switch and light. I want to add an additional light to this circuit, do it use the Brown or...
Replies
6
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock