Aico smoke alarms and Texecom house alarm

[JLeague]

I am in the process of getting my house rewired and I forget to think about adding smoke alarms and a burglar alarm. As the house is getting a total redecoration then it would be worthwhile to do it now.

I have been on the Aico website but it all seems a bit confusing - radio linked, audo linked and multiple series. Looking at Alarms I find it a bit easier to understand but then I really don't know which model I should aim for.

I want a hard wired system, where the smoke and burglar alarm if they are tripped will call an auto dialer. I don't need remote access, just something simple and reliable.

The house has hallway, living room, dining room, kitchen, upstairs landing, 3 bedrooms, bathroom.

So I need a smoke alarm in the hallway, kitchen, landing

I need door contacts for the front and back doors, a PIR in each living Room and dining room, PIR on landing upstairs

An alarm box to the front and to the back.

A keypad in the hallway.

Battery backup and an auto dialler - will this be gsm, internet or hard wired into a socket? I will be getting Vodafone broadband but there telephone is VOIP based so there is no separate telephoen line.

 

[telectrix]

afaik, texecom do their own fire detectors to connect into the alarm panel.

Texecom - Electronic and digital security systems for everyone.

We are the world's leading provider of home and business security systems. Electronic and digital security systems for everyone.

www.texe.com

 

[JLeague]

afaik, texecom do their own fire detectors to connect into the alarm panel.

Texecom - Electronic and digital security systems for everyone.

We are the world's leading provider of home and business security systems. Electronic and digital security systems for everyone.

www.texe.com

Thanks. So that means I cannot mix and match. So best off going for Texecom for alarm and fire/smoke alarms.

 

[telectrix]

Thanks. So that means I cannot mix and match. So best off going for Texecom for alarm and fire/smoke alarms.

eggsackly. texecom alarms. liek all ithers, work on 12V for detectors. you need to use compatible devices.

 

[kropaske]

For you setup premier elite 24 will be enough. It will give you 10 zones expandable to 24 and 2 areas (one for house and second for garage or shed if needed). As a communicator I would go for smart com unit. You can self monitor system through the app. It is installed next to panel and connects to your router wired or wireless.
Also for the kitchen get heat alarm

 

[JLeague]

For you setup premier elite 24 will be enough. It will give you 10 zones expandable to 24 and 2 areas (one for house and second for garage or shed if needed). As a communicator I would go for smart com unit. You can self monitor system through the app. It is installed next to panel and connects to your router wired or wireless.
Also for the kitchen get heat alarm

Thanks.

Texecom - Electronic and digital security systems for everyone.

We are the world's leading provider of home and business security systems. Electronic and digital security systems for everyone.

www.texe.com

Looking at this then I need 2 x Texecom OH - multiple heat and smoke alarm for hallway and landing and 1 x Texecom RR Heat alarm for the kitchen.

Or should I also put a fire alarm in living room and dining room as well?

 

[UNG]

Thanks. So that means I cannot mix and match. So best off going for Texecom for alarm and fire/smoke alarms.

You could use a relay base under one of the Aico interlinked detectors to trigger a comms device as an option you also then can use the Aico Carbon monoxide detectors linked with the fire detectors if needed
I would use Aico 3000 series detectors from choice as I would not install fire detectors on an intruder alarm as it would not meet BS5839 pt1 or 6 even though the detectors are EN54 compliant
[automerge]1592938591[/automerge]

Thanks.

Texecom - Electronic and digital security systems for everyone.

We are the world's leading provider of home and business security systems. Electronic and digital security systems for everyone.

www.texe.com

Looking at this then I need 2 x Texecom OH - multiple heat and smoke alarm for hallway and landing and 1 x Texecom RR Heat alarm for the kitchen.

Or should I also put a fire alarm in living room and dining room as well?

Not understanding your choice of a rate of rise heat detector for the kitchen if going the Texecom route an FT64 would IMO be a better choice

 

[davesparks]

Also make sure you have enough sounders in the correct locations if you are using burglar alarm smoke detectors, you need to achieve the correct sound levels with bedroom doors shut so that the alarm can wake you if you are asleep.

Personally I am not a fan of using fire detection incorporated with the burglar alarm.

 

[kropaske]

Thanks.


Looking at this then I need 2 x Texecom OH - multiple heat and smoke alarm for hallway and landing and 1 x Texecom RR Heat alarm for the kitchen.

Yes, however you could go for FT64 instead of RR as sugested above

Or should I also put a fire alarm in living room and dining room as well?

As minimum is recommend to install fire detectors along escape route(s) and in high risk areas like kitchen

Also remember when doing 1st fix for alarm - panel only have 8 zones build in so if you need more, keypad will have additional 2 available

 

[JLeague]

Also make sure you have enough sounders in the correct locations if you are using burglar alarm smoke detectors, you need to achieve the correct sound levels with bedroom doors shut so that the alarm can wake you if you are asleep.

Personally I am not a fan of using fire detection incorporated with the burglar alarm.

Well in my old property I had an alarm fitted and the smoke detectors were all incorporated with the Burglar Alarm including a telephone dialler - so I am just working off what I had before. Granted that was about 10 years ago!
[automerge]1592952739[/automerge]

You could use a relay base under one of the Aico interlinked detectors to trigger a comms device as an option you also then can use the Aico Carbon monoxide detectors linked with the fire detectors if needed
I would use Aico 3000 series detectors from choice as I would not install fire detectors on an intruder alarm as it would not meet BS5839 pt1 or 6 even though the detectors are EN54 compliant
[automerge]1592938591[/automerge]

Not understanding your choice of a rate of rise heat detector for the kitchen if going the Texecom route an FT64 would IMO be a better choice

Thank you for the correct Alarm needed in the kitchen - I just read the texecom website and thought the RR was better.