Analog voltage tester?

[HappyHippyDad]

Could anyone give me a link or tell me were to get an analog voltage tester?

Just want to be prepared for phantom voltage!

Cheers all :smile5:

 

[trev]

JFGI Steve
Google is your friend.

 

[benji]

have a look on ebay for a avo

 

[tazz]

Rapidonline....RS...Maplins....ebay..the list is endless

 

[telectrix]

some nice avo8 models on ebay. or just go for a cheap analog multimeter.

 

[HappyHippyDad]

JFGI Steve
Google is your friend.

You cheeky sod!! Just googled 'JFGI' thinking it was a link to a analog tester!!

I knew this was a silly question and I do appreciate you not ripping into me too much. I did see many multimeters stating AC 250V but I use my multimeter when I'm fiddling about with the electronics at very, very low DC voltage and I just couldn't get my head around using a multimeter as a mains tester!

I wanted one of those old fashioned looking things you got the other day Tel!

 

[trev]

It's not a silly question mate but there are analog multimeters out there for not a massive amount of cash which will do your electronics stuff.
Those old fashioned looking things will cost you unless you hit ebay at the right time and hit lucky
Just keep trying mate, check out Tel's "Bargain" thread for an example.

 

[Marvo]

Depending what digital tester you use you might be able to get a low impedance kit for it. Something like this

 

[HappyHippyDad]

Depending what digital tester you use you might be able to get a low impedance kit for it. Something like this

Now I like that Marvo, thanks!

Trainee???

 

[Marvo]

I use an old Kyoritsu analogue multimeter. It's always been reliable and accurate and I picked it up for next to nothing at a stall on a market. Maybe keep an eye on Gumtree or similar classified advertisements sites, analogue testers aren't fashionable because they don't sync with facebook and instagram so youngsters nowadays won't touch them with a bargepole. If you bide your time and keep your eyes peeled you'll get one for a song.

 

[Marvo]

Trainee???

Yeah, long story but I was hoping to win a prize so I promoted myself to trainee for a while.

The retrofit kit I linked will only work with certain Fluke testers I think. Maybe Megger, Kew and metrel do something similar, but not sure to be honest.

 

[Deleted member 72666]

Yo cheeky sod!! Just googled 'JFGI]' thinking it was a link to a analog tester!!
[/B]
I knew this was a silly question and I do appreciate you not ripping into me too much. I did see many multimeters stating AC 250V but I use my multimeter when I'm fiddling about with the electronics at very, very low DC voltage and I just couldn't get my head around using a multimeter as a mains tester!

I wanted one of those old fashioned looking things you got the other day Tel!

Come on Steve even I could work that one out!

 

[HandySparks]

some nice avo8 models on ebay. or just go for a cheap analog multimeter.

Beware that many cheap multimeters, analogue and digital, won't comply with GS38 and will be unsafe for testing electrical installations due to the level of potential fault currents and voltage spikes. If all you want to do is prove whether a 230V supply is real or phantom, a test lamp will do just fine:

Drummond Test Lamp Mtl7 150-500 Ac/dc New Without Packaging | eBay

MTL7 DRUMMOND Test Lamp New and sealed. | eBay

 

[telectrix]

keep an eye on this. identical to mine: :

Avometer 8 Mk 5 and accessories, excellent condition | eBay

 

[Jurassic Sparks]

I must admit I prefer an old fashioned testmeter for lots of my work, I keep one in my toolbox as I dont always keep the MFT with me ( space)
however i buy a new one every years from my local wholesaler usually about 25 quid with decent leads and to save to bother of calibrating it I either stickit on ebay at 99p or give it away when I get the new one
I still have a couple of older analoque meters and when fault finding on electromechanical equipment or alarm systems I find it easier to work with, but thats just because I am very old

 

[happysteve]

keep an eye on this. identical to mine: :

Avometer 8 Mk 5 and accessories, excellent condition | eBay

That looks lovely I remember some of the old boys in the electronics labs using those... before they all retired. Funnily enough, all the avo's disappeared around that time, too...

One of the forum sponsors sells an analogue meter:

Metrix MX-1

... anyone know if it's any good?

 

[HappyHippyDad]

That looks lovely I remember some of the old boys in the electronics labs using those... before they all retired. Funnily enough, all the avo's disappeared around that time, too...

One of the forum sponsors sells an analogue meter:

Metrix MX-1

... anyone know if it's any good?

Hi Steve,

The link doesn't work, which sponsor is it?

..

Dont worry, found it... thanks! probably go for a slightly cheaper one though :smile5:

 

[GMES]

You cheeky sod!! Just googled 'JFGI' thinking it was a link to a analog tester!!

I knew this was a silly question and I do appreciate you not ripping into me too much. I did see many multimeters stating AC 250V but I use my multimeter when I'm fiddling about with the electronics at very, very low DC voltage and I just couldn't get my head around using a multimeter as a mains tester!

I wanted one of those old fashioned looking things you got the other day Tel!

Steve you can't talk about Geordie like that!!

 

[Guest77]

Yeah, long story but I was hoping to win a prize so I promoted myself to trainee for a while.

The retrofit kit I linked will only work with certain Fluke testers I think. Maybe Megger, Kew and metrel do something similar, but not sure to be honest.

well we still need entries in the trainee area lol

 

[netblindpaul]

AVO8/9 the best.
You could look at a Fluke sv225.

 

[Knobhead]

well we still need entries in the trainee area lol

Marvo won't let me in.

 

[Besoeker]

I use an old Kyoritsu analogue multimeter. It's always been reliable and accurate and I picked it up for next to nothing at a stall on a market. Maybe keep an eye on Gumtree or similar classified advertisements sites, analogue testers aren't fashionable because they don't sync with facebook and instagram so youngsters nowadays won't touch them with a bargepole. If you bide your time and keep your eyes peeled you'll get one for a song.

Here in UK, car boot sales are sometimes a good source for all sorts of bargains including electrical gear.

Somewhat off topic but we picked up a new DVD player, still in the original box and complete with manual for just a fiver. A whole box of cable ties for 50p. A digital multimeter for a quid.

 

[HappyHippyDad]

Would any analog voltage tester be suitable for testing to see if real or phantom voltage? Everyone seems to be mentioning the older types (i.e Avo8 etc), would a new analog multimeter still do the job?

For example:

GENERAL PURPOSE ANALOGUE AC DC MULTIMETER VOLTMETER NEW | eBay

 

[7029 dave]

Beware that many cheap multimeters, analogue and digital, won't comply with GS38 and will be unsafe for testing electrical installations due to the level of potential fault currents and voltage spikes. If all you want to do is prove whether a 230V supply is real or phantom, a test lamp will do just fine:

Drummond Test Lamp Mtl7 150-500 Ac/dc New Without Packaging | eBay

MTL7 DRUMMOND Test Lamp New and sealed. | eBay

With fused test leads they will comply.

 

[Richard Burns]

Would any analog voltage tester be suitable for testing to see if real or phantom voltage? Everyone seems to be mentioning the older types (i.e Avo8 etc), would a new analog multimeter still do the job?

For example:

GENERAL PURPOSE ANALOGUE AC DC MULTIMETER VOLTMETER NEW | eBay

It really depends on how they have managed the electronics inside the meter.
The old style analog meters had a high resistance in series and this gives a voltage reading across the resistance but there is some flow of current acros this resistance that will (very slightly) drop the votlage and give a lower reading.
However modern meters use electronics to create a practically infinite resistance against which to measure the voltage, this gives accurate values of voltage without any loss through the resistance, however this is very definitely the unloaded voltage and this means the presence of a large potential difference with no capability of supplying current will register as a voltage even though for all practical purposes there is no voltage present.

If the meter manufacturer uses a modern infinite resistance system and uses electronics to transfer this to a needle on a meter dial then it would be the same as any modern unit.
I do not know the availability of standard chips that would make this construction straightforward but I would expect the cost would be greater than a standard analogue arrangement so the ease of making a basic deflection meter means that they probably would not bother and that a modern analogue meter would be fine.
However others may know different.

 

[Simonslimline]

You cant go wrong with a simple Drummond test lamp. I picked up a brand new one off Ebay for £25.

 

[HandySparks]

The point is this. What you need to confirm that a voltage is 'real', not phantom, is a meter or indicator that loads the supply sufficiently. The figure that matters is its input impedance; a low input impedance will load the circuit under test and pull down a phantom voltage to a level close to zero. A 'real' fault will be unaffected and the full supply voltage will be indicated.

Clearly, a test lamp will load the supply as it has (relatively) a much lower resistance than the inductive or capacitive 'fault' and will try to draw much more current than a phantom voltage will supply. 'Simple' analogue meters will also load the supply to a greater or lesser extent.

Digital meters and the 'better' analogue ones will have a high impedance, which is exactly what you need for most electronics work, so that the meter doesn't significantly affect the voltage you're trying to measure.

The Fluke TL225 / SV225 mentioned by Marvo puts a 3kohm resistor across the circuit being measured so that a high impedance meter behaves like a low impedance one.



(I've covered some of the same ground as Richard Burns but I thought it worth saying anyway.)

 

[stevethesparks]

This is one reason I recommend the Fluke 117 as an electricians meter (although not analogue) as it has a lowZ setting of which eliminates ghost voltages.

 

[shanky887614]

It really depends on how they have managed the electronics inside the meter.
The old style analog meters had a high resistance in series and this gives a voltage reading across the resistance but there is some flow of current acros this resistance that will (very slightly) drop the votlage and give a lower reading.
However modern meters use electronics to create a practically infinite resistance against which to measure the voltage, this gives accurate values of voltage without any loss through the resistance, however this is very definitely the unloaded voltage and this means the presence of a large potential difference with no capability of supplying current will register as a voltage even though for all practical purposes there is no voltage present.

If the meter manufacturer uses a modern infinite resistance system and uses electronics to transfer this to a needle on a meter dial then it would be the same as any modern unit.
I do not know the availability of standard chips that would make this construction straightforward but I would expect the cost would be greater than a standard analogue arrangement so the ease of making a basic deflection meter means that they probably would not bother and that a modern analogue meter would be fine.
However others may know different.

thanks rich for the very informative post

 

[shanky887614]

This is one reason I recommend the Fluke 117 as an electricians meter (although not analogue) as it has a lowZ setting of which eliminates ghost voltages.

could always put a resistor across the leads