OP
- Reaction score
- 0
Hi guys. Thank you for everyone’s help in trying to resolve this issue, I do appreciate it.
Here are my thoughts, when both PIR’s where installed - either side of a partition wall - I believe that a single cable was used and the wires spilt between the two PIR’s. When reinstalling the two new PIR cases the wires where not long enough, so a different cable was used with different colours. So as you guys have worked out the white/green and white/blue wires aren’t connect at all.
Here are my thoughts, when both PIR’s where installed - either side of a partition wall - I believe that a single cable was used and the wires spilt between the two PIR’s. When reinstalling the two new PIR cases the wires where not long enough, so a different cable was used with different colours. So as you guys have worked out the white/green and white/blue wires aren’t connect at all.