Bonding of conduit in kitchen floor

[telectrix]

my tuppence worth. similar scenario is metal tray/basket carrying T/E. that tray/basket does not have to be earthed.

 

[Pete999]

Pete they are conduits, part of the electrical installation, They cant be extraneous!!!

Yes realised that what a Dork I am

 

[Ian1981]

Hmm after much thinking taking everyone’s comments and digging in the regulations again I’d be inclined to agree that it’s an exposed conductive part and would require earthing.
I hope your all happy

 

[Risteard]

Hmm after much thinking taking everyone’s comments and digging in the regulations again I’d be inclined to agree that it’s an exposed conductive part and would require earthing.
I hope your all happy

Glad you agree!

 

[telectrix]

so why do we not earth tray when it's carrying T/E?

 

[Ian1981]

Because I guess the tray isn’t part of the electrical installation that’s to say it’s not classed as an exposed conductive part it’s only a cable management system.
If you have GN8 I’d have a read of page 164&165.

 

[Pete999]

So is the conduit isn't it? cable management I mean.

 

[Ian1981]

Conduit is containment.
Where tray basket is a support system.
That’s my understanding anyway.
As I say have a read of GN8

 

[telectrix]

Conduit is containment.
Where tray basket is a support system.
That’s my understanding anyway.
As I say have a read of GN8

good point. can you now advise IET on some of their more obscure ambiguous regs.?

 

[Andy78]

I have earthed basket and tray many times before to follow specification.

 

[telectrix]

I have earthed basket and tray many times before to follow specification.

so. up aladder checking for a damaged cable. one hand in contact with the esrthed tray. other hand fishing round contacts a live conductor ( insulation damage?). ZAP.

 

[Ian1981]

Usually through parallel paths the basket ends up earthed anyway such as metal framed structures when you mount the brackets to them.

 

[David M]

so. up aladder checking for a damaged cable. one hand in contact with the esrthed tray. other hand fishing round contacts a live conductor ( insulation damage?). ZAP.

Would that not apply only if the tray was extraneous?

 

[Risteard]

I have earthed basket and tray many times before to follow specification.

Indeed. For right or wrong it's commonly required by clients.

 

[Midwest]

Should of just used plastic conduit. It would of saved all this arguing

 

[Midwest]

I remember reading this article some time back on cable tray

Does a metallic cable tray require earthing or bonding? - https://www.tradeskills4u.co.uk/posts/metallic-cable-tray

Not that I've installed any for 30 odd years.

 

[westward10]

Got a belt off a tray with T&Es on it in a ceiling void a few years back. One length run across the void and was isolated from any earth. The cables dropped through the perforations with no protection and one must have been cut through because the tray was live which I discovered when I provided a path for it to the ceiling grid, never say never.

 

[sam400]

Good thread!

Do we have to earth the old conduits that we reuse during a rewire?

 

[Deleted member 26818]

Thinking again about this subject, it will only require earthing, if part of it is exposed.

 

[Deleted member 26818]

What is it you disagree with Risteard?
That we already done it 3 or 4 posts back, or is it the Regulation you disagree with?