Discuss Cable Entry Reg in the UK Electrical Forum area at ElectriciansForums.net

IAmSparkytus!

-
Esteemed
Arms
Reaction score
315
Think I'm going loopy and can't for the life of me find a regulation regarding suitable cable entry to accessories which deems whether nylon glands etc are required.

I've noticed a NAPIT EICR references 522.8.5 but after reading the regulation I'm not sure whether it's actually relevant or not if there isn't any "mechanical strain" involved.

Thoughts?
 
PVC/PVC. Came across an installation with sockets loose on a suspended ceiling with no nylon glands which in turn has allowed the cables to come back through the knockout hole on the backbox.

HATE HARD PLASTIC BACKBOXES FOR THOSE STUPID KNOCKOUTS AND THE FACT THAT THEY SMASH TO SMITHEREENS IF YOU DROP THEM FROM ANKLE HEIGHT!!!


Edit: Didn't mean to type in capitals there!
 
I'd already been through most of those, just looked at the others and im not sure any of them are applicable to my question

There's no mechanical strain on the cables, just poorly made off which they might have gotten away with if stuffers were used and tightened to keep the excess cable hidden away
 
I might not be making myself clear enough, apologies if I'm not.

I'm basically trying to say, if the cables are pushed back through the hole, and the hole is suitable sized (as they are when they're the knockout type on hard plastic backboxes), is there a regulation saying nylon glands are required or cables should be clipped at point of entry to an accessory to prevent them being pulled back out?
 
I might not be making myself clear enough, apologies if I'm not.

I'm basically trying to say, if the cables are pushed back through the hole, and the hole is suitable sized (as they are when they're the knockout type on hard plastic backboxes), is there a regulation saying nylon glands are required or cables should be clipped at point of entry to an accessory to prevent them being pulled back out?
they should be clipeed or otherwise restrained, and the boxes should be secured, not just lying loose on a suspended ceiling.
 
try the one that mentions good workmanship.
 
Strain relief and IP rating of the accessory spring to mind.
 

Reply to Cable Entry Reg in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi guys, I'm shadowing the electrician who is doing our EICR's and after visually inspecting the service cable and service head, I noticed a bit...
Replies
12
Views
1K
Morning all So the site I'm based at recently had some work done (think partitioners). This package of work included electrical. This was...
Replies
47
Views
8K
NICEIC Certification Scheme Getting accredited to
Looking for some advice regarding joining a CPS. I've been in the electrical industry in various roles for nearly 10 years. I started my...
Replies
15
Views
1K
Afternoon all. Bear with me on this one... Despite having been involved in the electrical industry for many years, I'm only just about to embark...
Replies
15
Views
2K
Hi all, level 3 qualified sparky here, just getting back into it after some time out. So, what is considered best practice these days when...
Replies
12
Views
5K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock